Search results

Hi guys, my turn signals randomly went out last week. Didn't do anything prior to the time they went out. 91 turbo 5 speed. 1. My haz works, and i hear the flasher relay clicks when haz is pressed. 2. No indicators on cluster at all, nothing works when i try to use the switch on the stalk...

Hi guys, have been doing research about this particular shifter here: Just wanted to know what brand/ who made it. A local buddy has it and I just want to know what it is and some feedback. Thanks!

I'm wondering if my motor has normal oil pressure or something's wrong with it. At idle engine warmed to operating temp by the stock gauge. My oil pressure gauge is showing a little bit below the half way of 0 to the 1st line. And this would be the same way for a long period of driving and...

I'm having fuel cut issue at 9lbs and it is cutting off at 5500. I'm going to check if i have a boost leak 1st but i just want to kno can i install my greddy ebc profec bII and turn boost down to 8 and not have that problem? I think it is a leak because im on stock turbo and it is cutting off...

Hi guys, got an issue with my car lately. Car: 89 NA-T swapped auto. 89 turbo and ecu, intake, raptor racing ddp, test pipe, Apexi N1 catback. I peaked 10lbs on my greddy gauge. Ok. 3 weeks ago: i was boosting then the car bogs(7-8lbs). And when it does i see that the temperature gauge would...

Hey guys, right now i have a 3 inch exhaust and was thinking of getting a custom 3inch with the dual n1 muffler set up. I was thinking of doing it like this : 3" pipe after test pipe> 3" resonator>dual pipes to the muffler. I was just wondering, what size should i do the dual pipes after the...

I did my swap and now i want to do the conversion for the na tach to work with the car now. I took the board out, but my questions to those that have done it, where do you guys buy the resistors and which one do i know to buy? Here is a picture of the board it self with the corresponding...

Im tired of this problem with the car. It wont hold an idle, idle would move up and down, also, ecu is throwing colde 41, tps, i changed out the tps and it still the same. I know i have a boost leak, but atleast would that messes with the idle and make it like that? I disconnect the idle control...

I here have another dilema. I cant seem to find the plug for the one that i circled in the picture on the engine harness or anywhere on the car. So my question is where is the plug for this sensor from? I have the sensor i just need to find where to plug it in to.

I didn't know where to put this so im put it in general. Mods, if im in the wrong place please move it. First let me ask a couple of questions about our supra and our harness, including body and engine harnesses. How many engine harness are out there?Does 89 has it own harness or it would be...

My suspension set up is Tokico blues and HR&R. The thing is, i had tokico illumina II in the front with HR&R and just tonight i changed the shocks to tokico blues. The only delima i have is now there is noise all over the system, only in the front. I remembered to grease the long bolt that goes...

Ok guys, i lowered my car last week. I jumped on DEAL on 4 hr&r springs and 2 front tokico illuminas for...lets say, way cheaper than the price of the 2 front tokico illuminas; and they were local. LOL, so i went and bought 2 rear tokico blues, im on a budget. And my plan was to have tokico...

http://cgi.ebay.com/ebaymotors/86-5-92-TOYOTA-SUPRA-Carbon-Fiber-Targa-Top-replacement_W0QQcmdZViewItemQQcategoryZ33646QQihZ009QQitemZ190204388999QQrdZ1QQsspagenameZWDVW Anyone seen this before? "look" well made, price doesn't seem too bad if the piece is really worth it. Meaning well made...

Hi guys, i know i had asked this question before. But there are no clear answers that came up for me. My only question is that when i do my swap does it matter wich tranny and which harness goes together. Can a 5 speed harness work with an automatic??????? From this link...

Members with HIDs either from the group buy with Ck or aftermarket ones, this is for the Kit #1 ( high beam only). Your HID bulbs, is there a shield for the bulbs??? Or there is just a long bulb itself?? Also, those that are using Hella-E Codes, does the housing says H4 in the middle of the...

Well, i think 2 questions...but yea please answer! Will a 5 speed turbo harness works with an auto transmition? If i was to get a Auto turbo harness, can i keep the 5spd turbo ECU or wil also have to replace it with a AUTO turbo ECU? I have been searching all day and asking questions. Thanks...

I know this topic has been talked over SO many times but I am about to do a 7MGTE swap over to my NA and i have few questions to ask before the final swap. My motor: 89 7MGE AUTO Motor Swap from: 5 Speed 7MGTE 89+ My cousin is keeping the r154 so i have to stick to my Auto for now. So...

I know this topic has been talked over SO many times but I am about to do a 7MGTE swap over to my NA and i have few questions to ask before the final swap. My motor: 89 7MGE AUTO Motor Swap from: 5 Speed 7MGTE 89+ My cousin is keeping the r154 so i have to stick to my Auto for now. So...

Im going to put on the headers i just bought from a member recently and i want to replace theses hoses when i take off my exhaust manifold. This is TheChori's picture: Sorry i took it from your post, i didnt have a picture of these my self.

Well, here's the story. Im getting a totaled 7MGTE. It is a 5 speed w/R154, me and my cousin is going to tear the car apart and i will take the motor and he will take the tranny. There is nothing wrong with the motor, the car had got into an accident and the driver side headlight area is pretty...