Search results

Is there a way for me to delete my account? I'm just done with supras for a while and have no need for the account. If it can't be deleted that is fine, just wanting to know.

Getting a paint job and I'm going to do the interior at the same time. I need to repaint the interior trim.... I was thinking about sanding it down and then using some sort of primer then repainting it... Has anyone done this yet? I know that some people have died their interiors for the...

Ok guys, Picking up my 2JGE this weekend... Couple of questions though.. I was thinking about using the GTE oil pump and tapping the rear of the head so I could run sequential injection later on... do I do this or just use my 7M CPS and IS300 coils and run a 7M AEM later on? If I tap the...

Ok, most of you know that the 7M has seen it's final days in my car... I've been researching alot and wanted to get some opinions on which to do.. I know that with the 2jz ge I can find motors relitively cheap and I can run my stock 7M computer and piggy backs.. and fuel system... I don't...

Ran 12.2 @ 114.. 12.4 12.7 Best of all ran a MVPGTR and beat it all the way.. 12.4 to 12.7 my 1.95 to his 2.1... hope someone got that on video....

Ok I went to the strip onfriday night... sat I started to hear a small tapping sound... I is coming from the intake cam... I just had the head decked and they have to take out the cams to do so.. I'm about to take off the valve cover and take a look... trying to get to TX2K10 on Friday... what...

Well had fun at the strip last night.. ran 7.99 @ 92.5 mph... only got 5 runs in... today I noticed that it was making a tapping sound about 2k rpm and higher.. but its slight.. not very loud.. I've had rod knock before twice and this doesn't sound like that... the car still pulls really hard...

Ok so I just did a new mhg and rad and turbo and lots of others... today I was driving my car all around and noticed that my temp started going up then down.. then all of a sudden it was going up some more and you could see steam on the plexi in front of the gauges.. like when you take a shower...

Ok, I just got my car all back together on Tuesday night... It started right up! Drove around 100 miles and it was feeling good then started to roughen up a little at idle.. Last night it started rough and wouldn't hardly go! I brought it home and it cranks and you can can hear the pump go on...

My MHG blew because my Koyo radiator started leaking and got hot and blew just the exterior metal parts on the mhg... I took the whole motor out and sent it to the machine shop to get checked to make sure everything is fine... I'm replacing all the gaskets and seals on the motor, having my...

My Koyo Race Radiator started leaking the other day really bad, it got hot twice but not fully to the red line... As soon as I saw it start to creep up I pulled over and put some more water in it... I temp fixed the radiator with some of the liquid aluminum puddy... it's not leaking anymore...

I have to replace my TPS. We tested it at the ECU to check the wiring and at the throttle body and off the car, and the reading were intermitant. I have another TPS here that checks out fine but it is 90* rotated from the one on my car. Is it an NA TPS? Thanks

Ok, I had codes 41 and51 so they are both related to the TPS. So I decided to take it off and check everything out. When I took it off it was a little loose for some reason. I reinstalled it and it looks like there are 2 tabs that the 2 tabs on the TB fit into. I just put it all back together...

Hey guys, when I got my car running I refilled my AC system. The one thing that I noticed was that there was a loud squeal at first when I turned the system on. I sprayed some belt lube and loosened the belt a little and it went almost all the way. It's been working for the past couple of...

Ok guys, just got my rebuild done and now it runs but doesn't run good. It stutters some times, it's intermittent. 14 is Ignition 41 is throttle position sensor 42 is vehicle speed Now could this be because of my Zeitronix that is wired into my harness?? I followed ISMNS (spelling)...

Hey guys I'm about to wire up some injector clips for my new PTE injectors. But I need to know what color order the stock clips are? I know that they are Brown and Grey and and they are every other injector like brown, grey, brown, grey, brown, grey or vise versa?? I'm about to do this so...

Just like the title says, just wondering on how soon I can add oil and start the car after install? I have everything so far ready to go, I'm getting my motor back on Thursday and will be putting it all together and dropping it in. How long does the FIPG take to cure? It will be atleast 5...

OK guys, when cleaning up my pan to paint silver I noticed that it had a dent in it. I looked on the inside and looks to be fine. Then I looked at some old pics and it's been that way for about 4 years. I have another pan that is in good shape on the outside but the inside doesn't...

Hey guys the last time most of you saw my car it looked like this: This was at TX2K9 when my motor blew up. I worked my ass off to get it ready to go and have a great event. I almost sold it and parted it out. But the kind words and support from YotaRob, Trent, Dok33 and the rest of you...

Hey guys, I've read a couple threads in the search bar, but didn't find any pics. my motor and tranny is out right now and will be going back in next week, but I wanted to get my bung welded on so I can watch everything once I get it started. I was looking to get it welded to the down...