Hey guys, its been a while. So, I have some time to work on the old supra motor. I got it all apart but, I can't figure out how to get the two "Dowel Pins" that are on the surface of the block off. I heard vise grips but, I didn't want to go that route. Is there any tool and if so can you...
First off, I'd like to say Hi to everyone at Supramania its been a while. My 89 Mk3 Turbo is still in storage and I am doing little by little to get it ready to be rebuilt. I've been reading a couple threads and found out that "Spec" Stage 3 clutch and Fidanza flywheel; which I have already...
I have an engine that bent a rod, however I have another block that was in working condition before it got handled by a shop and seperated from the head(don't ask). I use my supra as daily trasportation so I am in need of fixing it. My plan is to get my old block and use my working head from the...
So, I was just about to go to work in the old supra(89 7m-gte r154) right? Well I start it up and wait about 5 minutes. I head out slowly not boosting or hammering on the gas or anything because its still warming up. I've done this alot, so i'm going down the street and the car starts like...
So I bought one of these a while ago. I like the concept, i like the response. The only problem is the throttle keeps sticking which i've never had a problem with the old linkage set up. On top of that don't buy one of these set ups expecting it to be polished like the picture they show. The one...
I wanted to see if anyone had a new style HKS BOV, since the older style is very scarce, I was thinking about buying a newer HKS BOV. I also would like to know what is a good setup, meaning whether to recirculate or vent to atmosphere. I only have a stock turbo and full exhuast from the turbo...
So I got my Fidanza flywheel my supra on friday and the damn thing had a gouge on it. I swear I pay all this money and its supposed to be new and someone drops it. So I take pictures and send it to JSCSPEED the place where I got it from. All they said "we are going to file a claim to UPS."...
Anyone ever used the Fidanza clutch? I was thinking about getting it. I already bought the Fidanza flywheel, and i just need to save for a clutch. My Supra only has DDP, test pipe and a 3in catback with a skunk2muffler. and KandN FIPK. Planning to get a better IC, BOV and atleast a boost...
Okay guys I love the conviences like AC and powersteering but you know what my AC doesn't work and my powersteering leaks. I already took out my AC. However I don't really know what to do with the Powersteering pump. Is there a way where I can just run straight rack and pinion. Please let me...
Have a good condition motor with a standard rebuild on it, however I'm running the same old turbo thats been burning oil, I am going to put a new turbo on, this upcoming long weekend. I am just curious when a turbo burns oil can you check it by opening your radiator cap when motor is cold, by...
Here are my questions. Is there a thread on here about what the difference is between what a 4 puck, 6 puck, and 6puck grooved are? Also what would be better for an r154 mk3 turbo? My tranny hasn't been surfaced ever, the tranny is leaking from the tail where it meets to the driveshaft, anyone...
I changed my old clutch master cylinder to an aftermarket one because the slave was changed, and this one was giving out and leaking fluid slowly by the pedal. Reason for the delay on changing was because no funds at the time. Anyway so we change it out and put it all together and bled it. The...
i was having a little fun with my 7m and I over reved it it went to about 6600 barely over the limit. However the car then shut off. I started it back up and it idled fine and temp was good, so was oil pressure. I am due for an oil change and I need to change my plugs. The point is after I over...
Its been about a year since the Supra has been on the road. Through searching and searching, I found Kaizen Motorsports. Thanks to Jose and the guys the Supra has a new engine and the car runs very well. Out of a stroke of luck Rodel happen to be there the day we had to make the descision of...
Well the Supra's been sitting for almost a year now. I finally am able to safe up enough money to send the my 7m-gte 89 R154 Supra in to get some well needed work done. First off no one can really tell me whats wrong with it unless you look at it. So I talked to Jose at Kaizen motorsports, he...
I need to know this, I know Duane's gotta sweet set up and i've been talking to him about it. I kinda wanna do it to my car, but there is much I don't know about it, actually I don't know anything about it. Is there a thread on here that I can look at explaining the benefits of sumping the gas...
Well about every place I go to get a battery with every design except the stock my battery cables are too short to reach the battery posts. So I need to make the battery cables longer which they are still stock. The negative is easy. but the Positive seems like a pain. Anyone know how much...
Hi, I have a 1996 Toyota Corolla 1.6 liter Single over head cam automatic. I decided to install a Protach Tachometer in the car for safety reasons for when I travel through the grapevine. We hooked up the green wire to the disbutor, The red wire is hooked up to the radio acessory fuse and we...
I got a door for the supra since my old one was banged up. The door i gots hinges were taken off. Anyway of alligning right so it doesn't sag? Also I found that its easier to access the bolts for the hinges with the fender off LOL. So any good methods or tips besides getting a door with the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.