While I have seen a few people offering targa braces they can be hard to come by. If you want to spend a pretty good amount of money the "weezl wings" can be found. Some people also offer bars. I guess the bars probably work well but I wanted something with a little more style. I decided to fab...
As you may have guessed from the title I have an idle problem. I recently rebuilt the engine and did the is300 coil on plug swap. I did not have this problem prior to the build but the engine was smoking terribly and lacked power so I rebuilt it again. On cold start up the car seems to run fine...
Ok, I have a question about my newly rebuilt engine. I shimmed the oil pump but I still have low hot oil pressure. When I first start up oil pressure is great, like 45-50 psi at idle. As it warms up it drops which I expect. While driving the first 20 minutes or so my pressure seems to be "in...
Just as the title says, is there a write up with pictures or anything for porting and polishing the 7M head? I have been searching for a few hours and find some answers but not all in the same place and some varying opinions. I know not to mess with the exhaust side. My main concern is how much...
Hey everyone, I want to relocate my evap canister. I do not want to delete it but perhaps substitute a smaller one. I have tried searching and just end up in circles with people talking about why not to remove it. In those other threads it is always mentioned "just get a honda/kia/tercel one"...
Hi. I was wondering if anyone else has had a kind of ringing noise coming from the front of their 7M. My roommates car has this metal, very light sounding "ring" coming from the front of his engine. I would not describe it as a rattle or a knock, kind of like a pinging or tinging on a thin piece...
I am not sure if this is in the right section, if not, mods please move it. Anyway, I have a 60-1 o-trim journal bearing Boss Sr. turbo. I am wondering what size oil feed lines people are running and if they are running a restrictor and or filter or not. Any help is appreciated. I've tried...
So i have seen a thread similar to this before but i cant seem to find it. Basically, i want to know how little electronics i can get away with and still have the car run properly. Like lets say, i want to run the motor on a stand/engine dyno(i dont), how much would i have to hook up to make it...
so. i have a code 52. now before i get a bunch of replies saying, "its knock sensor signal" or "search" i already know what the code means and i have already tried searching but its very seldom that i can ever find what im looking for with the search function here.
so now that i have that...
I have tried searching and i know that things like this have been covered but i cannot seem to find what im looking for, i believe my case is different.
I just rebuilt my motor, new pistons, rings, mhg, arp harware, resealed turbo etc less that 2000miles ago. I broke in my engine and have been...
hi. this is not really much of a build thread since i do not have pictures of all of my new parts or the old ones but i figure its worth posting. for those who dont know, my name is Matt. I purchased an 88 turbo, targa, 5spd supra about two years ago. it is color code 21C which is two tone blue...
so ive been searching and cannot seem to have any luck. im trying to get my car running. it has a newly rebuilt motor with mhg, +.020 bore, 660cc injectors, afpr, safc, lex afm. i can get the car to start and it idles really low, like less than 500rpm. i have my base fuel pressure set to about...
so i dont know if this has been covered before or not but if it has i cannot find it. does anyone have a chart for target AFR's at a given rpm on our motors or is that one of those things that will be different for every vehicle. i know that the ACTUAL afrs will be different for every car but...
i searched and coulndt find the answer i was looking for. if this has been covered please direct me to th thread. so i rebuilt my motor and am just now getting it put back in the car. the motor is in and the most of the connections are hooked up already. i figured i would hop in the car and turn...
im not sure if this is in the right section or not but i have a few questions about the cooling system. first question is about wiring a new temperature gauge. the new gauge i got came with a sender and it says that i need to put it somewhere in the engine block to allow the sender to ground. do...
i saw a silverish 86.5-88 supra that had just been in a wreck on hwy 70 outside of new bern. it was just past the bridge. it was this morning around 7 o'clock. i was just wondering if it was someones on here. it looked clean,except that it was just in a wreck (like it was in good condition...
hopefully this is in the right section. i have a question about the knock sensors on the 7mgte. more specifically, the wiring for them. i am in the middle of a rebuild and planned to re wrap my harness while everything is out. so i got all the tape and tubing off the harness and there are a few...
so, as some of you may or may not know, i am in the process of doing a full rebuild. i started bc i feared BHG. the original plan was to strip it down to the long block then just take it to the shop and have them do my machining and rebuilding. well, i had some free time and thought id pull the...
ok, so ive gone through every page and tried searching but cannot really find what im trying to find out. so i already have a bunch of parts for a rebuild but i am wondering if anyone has other suggestions or anything. i want to know what else i need basically.
what i have(came from Mizumo...
so i thought i remembered a thread discussing this topic before but i cant seem to find it. my question is, how much horsepower can the oem replacement head gasket handle. torqued down to 80ft/lbs with arps of course. if someone else knows where to find the thread with this information please...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.