Search results

I am doing a 1.5jz buildup with a GE block, with plans to use modified CT12A's. I have sourced some fittings to use soft lines with the stock turbos. So I am looking for info on running the feed lines. The block has not been tapped so I will be using an oil filter adapter. I am planning to...

Dropping the 1JZ out of my Supra into my 94 GS. Question is, the GS already has an Aristo trans in it, that has been beefed up. With the 1JZ engine, which transmission can I use? The 1JZ right now, has a JZA70 Supra auto behind it. That I cannot use with out getting a custom driveshaft done...

Car is an '88, 1JZ with a 67mm turbo, purple top 550's. E manage blue with E-01. This error pops up only when the car is running, which has only been at idle the past couple days I've been playing with it. Car needs some tranny work so I haven't been able to drive it, just letting it idle in...

http://www.youtube.com/watch?v=k90BBG08c-Q As can be seen in the video, the needle on the gauge is bouncing around abnormally. It also in the past before the car went down for some repairs, would rise to a certain pressure but then stop rising, no matter how much you turned the screw. The...

I've done a fair bit of searching and did not come up with anything, so if this has come up before my apologies. The issue I'm having is with a set of SMC Products brake lines, but the packaging also says Goodridge on it in several places so I'm not sure who really made them. Problem area #1...

Want to preface this with the only change I have made to the car is plugging in my E-manage blue, to tune with but have made NO changes so far. Mentioned b/c I think the A/F issues may be related. Very weird problem tonight, started after leaving the store heading home. Got into boost a...

Any one have any experience with these? They're priced at about $700, and seem good for what I'm looking for, which is just a basic coilover kit. Really just wanting the ride height adjustment, but the adjustable damping is a plus also. Any feedback appreciated.

To save from a long story, bought a set of set of really rare Blitz wheels, knowing at the time of purchase two had minor cracks. Take them to be repaired/refurb'd, wait a MONTH for them to be finished, all along the only updates I would get would be "They are working on them, call me back...

Noticed it tonight for the first time, on my PLX WB. Happens off idle between 1k and 2k RPM, A/F goes in the mid 16's, and then with more throttle/RPM richens up and drops into the 14's, 15's. But, when cruising I also noticed it bounces around in the high 15's to low 16's. Motor doesn't run...

Could I get one of out there that has the EMB running properly, with the ignition harness wired in confirm this for me. I'm looking at this wiring diagram from Mohd parts..... http://www.mohdparts.com/emanage/install/install_help/wiring_help/index.html And looking at the 1JZ pinout...

Boss gave me this today.... Really is 80% Nitromethane, don't know what I'm going to do with it. Kinda wanna toss it in my buddies lawnmower see what happens. :evil2: It's been sitting for about 4 years, so who knows how good it is still.

Just bought these old school Blitz wheels, and have been contemplating powdercoating the centers black, and since I do polishing at work, polishing the lips. But....another part of me says just leave em' silver and call it done. Also, anyone have experience taking apart two piece wheels, I'm...

Who would have thought, a relatively small by today's standards a/r single turbo 1JZ setup would be soooo much fun!! Even un-tuned at just 10psi, it's just so much fun to drive, and it's not even so much the single. Just that the car is running, and everything is working, all of that hard work...

http://www.grs-motorsports.com/notic...o/vids/314.wmv

I'm in the process of finishing up my single install and am trying to detemine if I can use my PLX WB to replace the factory 02 sensor all together. In the searching I've done, on mostly 7M related stuff, it is doable but a resistor is needed for the ECU to see the signal of the heater wire...

I'm getting the itch to finally make the trip out. Although, unfortunately w/o my car. But, wanting to get an idea now of who is thinking about making the trip out. I've always wanted to goto Vegas, and have some vacation time I have to use up so I'm really looking at going at this point. Anyone...

Not something I would normally do, but as a fellow racer, car guy and human being, I want to try to help this guy out and find this girl...Could any of you in the Washington State area please keep an eye and ear out for her possible whereabouts, or at the very least keep her safety in your...

I'm looking at getting these seats... They look almost identical to the TTR Recaros, and what I'm wondering is has anyone run race harnesses with them? And, if so how did you route them?

Will I have any issues with the way this line is routed. It's -10 with a -4 feed, and a 45* at going into the pan... Here's what's I'm worried about.. Maybe I'm just being paranoid, but is that to much of a bend coming out the fitting? This is the first time I've done a single setup so I...

So this is very off-topic for this site, but i'm slightly inebriated and feel the need to share. I started this week at UPR Products, anyone who has owned, or does own or knows someone who owns a Mustang should know who they are. I'm working in shipping and gotta say as much of a go go go go...