Search results

Ok first ill start with the back ground on my setup. I own an 1988 turbo which was originally factory auto, somewhere along the line it was swapped with a r154. Currently it has a 2jzge-t running on 7mgte electronics. Im going to purchase the MegaSquirt v3 in the near future for a couple...

my question is does the CEL flash if the knock sensors detect detonation? ive searched but no dice. i know its a pretty easy question but i cant find a definite yes or no. also say is does flash, does it trigger the CEL with grnd or pos signal? thanks for any info :1zhelp:

i finally swapped my 2jzget and im trying to remember how the power steering was hooked up... when i initially "started" the swap about 6 months ago i had the hole system layout in my head, but my dumbass didnt draw it out for future reference.. so now im playing catch up.. :nono: what i have...

hey guys im going to be rebuild a Nissan ka24e in the very near future and ive got couple questions on the ring gaps ive come up with. i based my clearances off of IJ's formula, which is 4 thousandths for every inch of bore on the 1st ring, 5 thousandths on the second ring.. but i used 45...

i have a 1988 maroon mk3, color code is 3H2. i was wondering if anyone knows where to get it? would sherwin williams carry it? what clear do you guys recommend? THANKS!

i want to set an LED light in my pillar gauge pod to flash and warn me when ever knock occurs... from my understanding all thats needed are: -1x LED light -a power, grnd, and signal? -a resistor is this it? --------------------------------------------------------- but my questions...

i certainly am! here in az we can occasionally pick one up at Big 5 for $100+/-. with its devastating 7.62x54r round it makes a great budget hunting rifle in my eyes. there is aftermarket stock, rounds fmj/soft tipped for hunting etc, scopes, better bolt designs.. they are a blast to shoot...

ive searched google and cant figure out if a 1/8 npt fitting oil feed is good for a holset turbo.. im looking for something close to a -4 feed. but holsets oil feed are threaded at m12 1.5. meaning i have to thread a fitting in the bearing housing i found adapters for m12 1.5 to -6 and...

trying to follow tsrm on disconnecting the tie rod ends from the lca. in the tsrm it says to jack up the lca and use a SST to disconnect them. what is a SST? its refering to SST 09611-12010.. im mainly asking because i dont want to do this wrong.. heres the link...

hello folks, to the best of my knowledge code 43 is ignition switch, but i dont know how to check to see if its the wiring or switch. what is the proper procedure on testing the wiring and switch on a 1988 mk3 turbo? car was auto has been converted to 5spd and uses the factory ign switch...

hey, i neeed help with my power steering leak, its leaking from the passenger side of the power steering rack (where cv looking boot is), only that side no leaks on the drivers side. why is this? is there a o-ring on that side that its seeping past? or is my power steering rack gone? any help...

hello gents im currently trying to get prices on toyotas oversized pistons. i cant find them online, i know toyota goes up to lik .20 overbore but any links to help a brother out?

hey guys my plans are 2jzge w/ 7mgte eletronics, holset h1c @ 17-22psi for approx 450rwhp, car is a 1988 burgandy supra:love: so heres the boat im in: in a couple days im going be taking my 2jzge block w/ 2jzgte pistons, con-rods, and crank to be blueprinted.. ill include the hone...

hello gentleman, i picked up a hks f-con piggy back to try it out, its currently on its way to me, but i was wondering if anyone had any experience with it, if so how did you like it, mainly just want to know how well it'll keep my a/rs in check.. any input/ or 2cents are welcome.

hey guys when i connect my battery post either neg then pos or vise versa it arcs hot enought to melt peices of the batt post and send it flying... my assumption is that i have a neg wire touchig a pos wire somewhere things ive done since last start: wired in another male plug for my...

hey guys im currently on a mission trying to find a thread that was very informative about how to install a 7mgte cps. it had pics with words in them.. yeah the hole nine yards.. i havnt had any luck finding it ive searched every thing it could have possible been.. most i can find is someone...

ok i recently reacquired my 1988 mk3 supra <3 but the dude i got it back from isnt all there so no im currently chasing all the loose ends. the fuel issue im having is when i turn the key to on the pump doesnt come on.. i have jumped terminals Fp and +B and the pump turns on. so i...

hello supra mania im currently trying to get the 7mge i my 89' cressida running. its got spark. but no fuel, i can hear the pump buzzing, so i know the pumps working. but when i take off the "in" line for the fuel and crank it... nada.. :nono: so now im stuffed because toyota fuel filters...

i have a 93' lexus 2jzge with a cut harness (dont worry i bought for dirt cheap.) and i am currently on the mission to find a harness and ecu, so my question is will a n/a supra 5spd harness and ecu work with it?? are all the knock sensors and etc the same plugs?? thanks any and all help...

:1zhelp: i have a 93' lexus 2jzge with a cut harness (dont worry i bought for dirt cheap.) and i am currently on the mission to find a harness and ecu, so my question is will a n/a supra 5spd harness and ecu work with it?? are all the knock sensors and etc the same plugs?? thanks any and...