mk3 power steering diagram

[suprakidd]

i finally swapped my 2jzget and im trying to remember how the power steering was hooked up... when i initially "started" the swap about 6 months ago i had the hole system layout in my head, but my dumbass didnt draw it out for future reference.. so now im playing catch up.. :nono:

what i have so far for my search threw the fsm and looking at my parts:



nipple(s) in question are the one on the side of the p.s. res and the one on the rack...

edit: sorry for the shitty drawing. im primary left handed and i use my right hand on the mouse, so trying to draw with my non-dominant hand with a mouse equals FAIL...

 

[gats]

Yep, you have got the system order correct. Not a bad sketch either

This should help clarify also: http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=4503&P=1

 

[suprakidd]

haha thanks! it took me two trys and about an hour to do that... you should have seen the first sketch...

 

[hvyman]

I'd get a cooler for the ps. The stock 7m oil cooler can work well for it. From rack to cooler and from cooler to res.

 

[suprakidd]

i want to get -6 an lines and cooler for it.

 

[hvyman]

Can do that easily. Push lock hose and fittings are pretty cheap.

 

[suprakidd]

yea plan is to either weld -6 to the stock res or buy a after market one like dm's, install a -6 adapter to the line on the rack, and then the lines to the -6 cooler itself..