hey there. How can I tell if a car has the original radiator support? What do the numbers mean on the support, I don't believe they match the vin but perhaps I am wrong. I do not think my current car does not have the original support.
Sorry for the silly question, I did search.
Well, I finally got my car on the dyno. This pull was at 15 psi on 91 octane pump fuel. I am pretty happy for such a simple set up.
1jzgte non VVTi
Borg Warner s360 83-75 with 1.0 divided turbine housing / tial 38mm gate / divided china manifold
crower small core 272s / Ti valve springs /...
I am in the process of shopping around for a paint job. I am curious what others have paid. I have no rust, dents, only door dings, my window moldings are shot, i am just going for a respray in a slightly different shade of silver. I am also adding bomex sides, rears, and probably whale tail...
I am researching my upcoming aem purchase and i am curious about a few things.
Are there any other bennefits to using aem for the 2jzgte over the modified honda aem that driftmotion sells besides the 12 injector function? I understand the 2jz box can run 12 injectors, but he honda box can only...
I have been searching this topic extensively and I was not able to get all my questions answered. The audio section is closed, so I figured I would post this here. So here goes.
1. Can anyone clarify if the 6.5" speaker pods from kevin M or stock are enclosed or not? It sounds like the stock...
I am half assed shopping for a CF hood and i am curious if anyone has positive recommendations or negative feedback on the current offerings for our cars. I found this one on ebay, but i am a bit weary of buying a piece that needs such go od fitment and finish site un seen...
hey everyone. I am curious what tools and techniques you have used to remove the slag from the cheap e bay china turbo manifolds that most of us run? I already shelled a top shelf turbo due to slag, and I need to get all that stuff cleaned out so I don't destroy my BW S 360 that is in the mail!
Hey everyone. I am looking to replace my loud 3" magnaflow with a stock looking and hopefully sounding muffler. Can anyone recommend something with a 3" inlet that will do th trick?
http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=TRB-KIT-MF-DP-1JZGTE-WT-GT35-T4&Category_Code=Supra-MK3
Has anyone run this manifold yet? I am considering giving it a try since i can't find a drew go, and the sp F1 is too much bank.
Hey everyone. I am going to change out my current POS china manifold when I purchase a new turbo and I am hoping for some reviews on the driftmotion modified 1jz manifold. Can any one comment how easy it is to mount, and how well it clocks / mounts the turbo and wastegate? I am planning on...
I finally got my car to quit breaking up, and was enjoying it at 9 psi when suddenly my motor got loud. long story short, i have pieces of turbine wheel from my PT6176 holding my wastegate open. I have no idea how i blew this turbo, but it has alot of shaft play now, and there are some chips...
I am attending Barrett Jackson and it would be cool to meet up with a few of the AZ mk3 guys, are any of you headed to Barrett Jackson or down to get a beer in Scottsdale?
hey there. I recently had my throttle body apart for powder coat. I want to replace the shaft seals but there are no Toyota part numbers for individual throttle body parts. has anyone found a replacement for these?
~scott
Hello everyone. My name is scott, and I am a supraholic.
My supra addiction started in 2001 when I bought a silver '87 turbo with some bolt on parts, low compression, and a hack job from the previous owner. I bought the car because I was obsessed with modifying cars, but I did not want to...
hey everyone. I am putting the AC back into my 87 1jz MK3. I have had the air conditioning lines, heat exchanger, fan, compressor, out of the car for almost 10 years. Besides just hooking everything back up are there any seals I should replace, or any other maintenance I should perform? I...
hey everyone. as i rebuild my harness and double check everything I wanted to try and clean up as much wiring as possible, and allow for easier installation and removal of the intake manifold.
Have any of you fellas changed your harness routing to accommodate this mission? If so where did...
hey there everyone. I am excited to try a different ECU in my car, but I ended up i with an AT ecu for my MT car with MT 1jz harness. I have searched here and SF for the neutral safety switch mod and I could not find anything conclusive for the MT harness. Can anyone share what I need to do...
Here is some info on my car
1jz
pt 61 turbo @ 9psi
crower 272 small core cams
550cc injectors
MKIV fuel pump
safcII
New copper NGKs gaped @ .024
AEM wideband with brand new sensor
No codes when jumpered.
The problem is a break up @ 4500 rpm. Which is right when I need to start adding serious...
Well, took my car out to get some brews. Get home, and its running great, park out side my garage to go open the house. When I come out to re start the car I flip the lights on and she wants to stumble and not idle at all. Pull the ecu and find this. This is my 2nd ECU. I have a sick...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.