Well, this was my first time ever at the track. I learned a bunch and managed to get into the 7's which was my goal for my first time ever drag racing. I'm super happy with how its running and think I can get into the low 7's soon.
My mods are listed in my sig. I was on MT 275 drag radials...
OK, so went to the dyno Saturday and had a great time. I was able to put down 533rwhp and 461 trq as you can see in the links below. Just a few question for anybody that wants to help.
1st. Can anybody make sense of the last pull I did and where after 6K rpms the power falls off and comes...
So, I just got in some 2JZGE Brian Crower 264 cams and they are for VVTI engines only. I talked to Brian Crower and they do not make a non VVTI 2JZGE cam. Does anybody have a solution or now where I can get a set of 2JZGE non vvti 264 cams that will work?
Just wondering if anybody has used and had success with these adjustable cam gear on a JZ engine?
http://cgi.ebay.com/ebaymotors/Toyota-Supra-Soarer-1JZGTE-2JZGTE-2JZGE-VVTi-Cam-Gears_W0QQcmdZViewItemQQhashZitem5633344a81QQitemZ370226252417QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories...
Hey, I just bought an extra intake manifold for a 2JZGE and it looks a little different from the one that I'm using now. The main difference I notice is that the injectors and injector ports look different. Can anybody tell me what the deal is? Is this a JDM 2JZGE intake manifold? And whats the...
My R-154 leaks from the back area, around the area where the drive shaft meets the trans. I just replaced the drive shaft/rear output shaft seal on the trans and it still leaks.
My question is, where else could the leak be coming from? I looked everything over when I took the drive shaft off...
I finally got the chance to take my setup to a dyno and tune it. The best it put down was 404 rwhp and 386 tq @ 23psi . These are not bad numbers, but I expected over 500rwhp and I don't know why it wouldn't hit that. I'm sure there are some issues that need to be worked out.
I would like...
So, I've been trying to track down a nasty whistling noise when I boost over 10psi. It was coming from inside the car and I couldn't pinpoint it. I finally found a definite leak coming from the break booster. I can feel the air coming out of the area where the brake pedal meets the firewall...
Hey, does anybody know what kind of solenoid is compatible with the Greddy Profec B spec electronic boost controller? I'm using this set up right now and the boost likes to go crazy after about 20-30 minutes of driving. It seems like the solenoid is going out. I'd like to purchase a new...
Well I'm doing a friends BHG and after I got the head tightened down i see this step that i missed (its step 1a on this page) :
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=EM&P=55
What is the packing for in this location? I think I can get to it by taking the plate in...
Has anybody seen this yet? I saw it on Clubna-t. Thought that it was a joke, but it looks alright. Anybody have experience with this? Any Thoughts?
http://www.dicktator.co.za/html/wasted_spark_ecu_s.html
I just purchased the R154 rebuild kit from MDC and need to figure out if I should do the rebuild myself or have someone do it for me. I am just a little worried about doing the rebuild and getting the tranny back in and it not working. A lot of waisted time. So here are a few questions I have to...
Ok, I am currently doing a 2JZ-NAT project. I just torqued the head down with arps to 80ft/lbs. I put all of the shim buckets back in from where they came except for 2. These two can be tapped in but will not move freely like the other ones. Also one kind of sticks and will not move up or down...
OK, so I am swapping a 2J NA-T into my 1990 supra. I am not very far on the project yet and am going to need any help I can get. I purchased the 2J from RandJdistributing. The first thing I am going to do is to get the head off to look at the cylinder walls and inspect a few things. Here are a...
My battery lasts about 3 days on a good charge, and then I go to start it and there is barely enough juice to crank the engine. It has done it on two other batteries and the one in now is a month old. I need advice on the best way to troubleshoot this problem. I have a good multimeter and good...
I found a great deal on some 225-55-16's for the sawblades I have on right now. What is the physical difference between those and the 225-50-16's I have on it now.
My friend let me use his spare head to get it rebuilt and prep it for a MHG. I would also like to get a port and polish and oversized valves, so here are the questions :
1 . The head has been sitting for a couple of years, is this bad and if so, what should I look for?
2. When I tear...
I am getting ready to have my supra painted red. It is factory super red II. I want to go with a little bit of a darker red . Anyone have some good pics of there supra painted red so I can make up my mind. Paint codes would help too. Thanks. BTW, I like the red on this car, Does anyone know...
I found this on the www.redlineforums.com and caught my attention.
http://www.redlineforums.com/forums/kills-section/7454-owned-mk3-supra.html
I know a guy with a redline that talks trash and I told him bring it on. I have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.