Search results

testing out the new gopro3 http://youtu.be/X_OfcVEAjIw http://youtu.be/2T4L8UhJx9E http://youtu.be/9kASDAhID7Y http://youtu.be/zyT8PhNgwDM http://youtu.be/zyT8PhNgwDM

I have changed out the slave cylinder the master cylinder, installed steel braided line all new fluid and fully bedded with the vac pump and old peddle method... Not sure what to do next:/ thanks so much.

So I've been getting surge at anything over 14psi. I made a boost leak tester and found some major boost leaks on the turbo side. So I got all those taken care of and then I hear a leak coming from the intercooler:/ I got it new from DM and installed it very carefully. Should I see about...

So I'm not able to use the stock o2 sensor on the down pipe I have for the single turbo. It is the 16mm screw in type, and every parts store I go to is not able to help me find what I need. Can some one tell me were I can get one or what I need to ask for. Thanks so much!!!!!

I have the DM single turbo kit with the tail knock off WG. I am not sure exactly how to hook it up, as far which vacuum lines, or if I can even use it on this WG. This is the MBC I have Here is how I have the vac lines so far, there is a vac line on top of the WG as well. Thanks for the help

So when I tried to start it for the first time it was a no go, noticed that the safe is not powering up either now. What should I check to see what happened? I also wired in 7m resistor pack for the 550's

It seems I am missing something here?? This exhaust is hacked to all hell, but it should not be this far off. What piece do i have to order now from driftmotions to make it fit? I figured everything would be good to go as long as I had the exhaust and test pipe:( One more question on piping...

So I have this resister I don't have the harness and it makes it confusing when everything online talks about using the orange-black wire for all black wires, and the other ones for the colored ones to the injectors. Can someone please walk me through this, just want to make sure I'm doing...

So I need help deciding on what size and what company. Mods to car so far are: Greddy emanage ultimate Walbro 400 12v mod relay Innovate xd16 wideband Blitz nur spec, test pipe DM 67mm .70ar, full kit, twin scroll, divided housing DM front mount IC kit, supports 700hp Port matched exhaust/head I...

So I have a koyorad with electric fan and it will not fit with this hydro pump pulley! Can I take it out and use something different like just a water pump with pully from a 2j? Anyone know steps to removing the hydro pump?

So I have 440's but I want to put 550's in my 1jz, i have been looking on what I need and how to do it. But can't find any real info on how to do it. Can someone walk me through it, or point me in the right direction on were to find out how to do it? Thanks!!

I was hitting some turns in the hills and was passing my buddy's vr6 rabbit and thats when it happened. I looked down at the temp and it was up very high, not all the way to the red, under it about and 8th. I pulled over and looked at the damage. The next day when I had it towed I had to start...

When I come to a fast stop or under hard breaking, i lose all clutch pressure and it just goes to the floor. I have to pump it a few times to get it to work again. Any good idea's why it's doing this?

just having alittle fun after the kitsap shine off meet. i let the 240 take the hit every time, no honking needed lol..... http://youtu.be/YOYzkVeEqLU

I looked around and only found eBay selling them. Not real wanting to use eBay . Thanks for any help

Every wednesday at 8:30pm next to taco bell off the 303 there is a import meet. Every Sunday at 8:30pm at Kevin G's tropical blast on the 303 has a meet for imports, old school, muscle car, ect. Let's get a supra section going, it would be nice to hang out and talk about the old supra:)...

so yesterday i started hearing a tapping/clicking noise, rpms drop down to 500 rpms when I push in the clutch and today i had my wife press in the clutch while i watched the crank and i saw it move a slight bit:( im not sure what to do in this situation, i dont know much about crankwalk so any...

So when ever I press in the clutch peddle today it will make a constant clicking noise, and if I raise the rpm's it will get alittle louder and clicking noise is faster. Also when I was trying to list to the noise and would press the clutch in and out, the engine stopped running when I press it...

so my car died when i came to a light and it would not restart, so i had to push it off the road and and started trouble shooting it. checked all fuses and the are good, jump fp and b+ and no dice there. so i have the 12v mod and i thaught it might be the bosh relay, so i ran power strait to the...

So when I loose traction in 1st gear, I get some wheel hopping. When i loose traction in 2nd gear i don't get any chatter/ wheel hop.it did the same thing with my 87..... What causes it to happen? What do I need to do to stop it from happening? I have new tokico struts and good springs. Thanks...