Stock 1jz
stock cams
8 blade Holset wh1c
custom ITB intake
Megasquirt 3
e47.5 (50% 93 50% e85)
835cc injectors
Twin Bosch pumps
This was 20psi peak boost. it was falling off because I dont have a boost controller. to up the boost we added vacuum tee's to the vacuum line gong to the wastegate. I...
Im trying to figure out what gives better acceleration. We all know the Getrags are close ratio 6 speeds, and the R154 is wide ratio. however the FD (Final Drive) on Getrag equipped cars are 3.1-3.2 while R154 cars are anywhere from 3.7 to 4.x Final drives.
So in the end, wouldnt a car with...
This project was inspired by Randy aka "becauseican" http://www.supramania.com/forums/showthread.php?3663-Guaging-interest-twin-GT28R-turbo-kit-PICS!!&highlight=gt28r
He had a great setup, but he had surging issues and he knew how to fix it but ended up moving on to a single before addressing...
Ok I'm not a noob I know how Intercoolers and aftercoolers work but here is the deal..
Im thinking of using a m112 eaton roots blower on a 1uz. like this..
On the Ford lighting it is cooled with an Air to water aftercooler that is placed INSIDE the intake plenum like this..
It works by...
I Have the chance to pick up an e6k with harness for really cheap, I did a search and got a little info, but I want to clarify some things.
Can you use the stock toyota cam angle sensors, and crank angle sensor? Any parts fabrication needed to run this system?
What sensors would I need to...
I have a 1jz 240
Weight 3097lbs
Crower small core 272's
BC springs and retainers
Garrett 60-1 .84 backhousing
Walboro 255
Sard 680cc
SAFC II
Blitz access ECU (no rev limiter)
6psi it made 290rwhp
on 14psi it made 421rwhp
I dont know what it makes on 18psi, but Im guessing its...
This is for a 2jz/r154 that will hold 550+ foot lbs I have narrowed it down to these two..
Southbend Feramic
http://www.suprasport.com/South-Bend-DXD-F-Track-Series-Clutch-Kit_p_477.html
Stage 4 @ driftmotion
http://store.driftmotion.com/static/i-stage4clutchkitforr154.php
Which...
I am on HPF and they have so many clutches
http://www.horsepowerfreaks.com/performanceparts/Toyota/Supra_MK3/Clutch/Clutch_Kits
I currentyly have a 1jz powered 240sx it weighs 3130 lbs I had a Driftmotion action 6 puck with new OEM pressure plate. and after two hard launches at the drag...
there is a Slight difference between the 1j and 2z oil feed in the heads..
Oil feed area of headgaskets. 1J on top, 2J on bottom
1J head, oil feed area
2J head, oil feed area
2J block, oil feed area
1J block, oil feed area
Block: 2jzGE
Will OEM GTE Headgasket be enough put the the motor in non Interference area with Crower Small core 272's? I know the 1jz head bumps compression up slightly.
Tell me if I need to go 1.5j or just go down to a .70 backhousing..
Specs:
1jz
Crower Small core 272 cams springs retainers
Garrett 60-1 with .84 divided housing
Divided Manifold
Stock cam gears
3" IC and piping
3"DP and Exhaust
Blitz ECU
SAFC II
Boost was only at 14 lbs which...
Specs:
1jz
Blitz ecu
Sard 620cc
SAFC II
Problem:
Car was done 3 weeks ago, and Dyno tuned Last week. everything was 100% perfect. but had a weird oil pan leak. we drained the oil, removed the pan, and resealed it. added fresh oil. then cranked it up. then all of a sudden the car was...
http://www.horsepowerfreaks.com/ViewPartDescription.asp?Brand=HorsepowerFreaks&Subcategory=Clutch_Disks&Details=Bronze_-_Supra_MK3_Turbo
VS
http://store.driftmotion.com/static/i-action6puckr154disk.php
whats the difference? are they even the same brand?
http://www.nengun.com/cs/short-shifter
^^ has the jza70 C's shifter for $240, the new Nashman costs basically the same price but with adjustability. I have read so many good reviews on the C's I wouldn't even mind paying $300 if its as good as people say, but the New Nashman Version 2 seems...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.