e6k on 1jz

[Boostage]

I Have the chance to pick up an e6k with harness for really cheap, I did a search and got a little info, but I want to clarify some things.

Can you use the stock toyota cam angle sensors, and crank angle sensor? Any parts fabrication needed to run this system?

What sensors would I need to get for the haltech?

 

[foreverpsycotic]

AFAIK you cannot use the stock sensors with the e6k, you need to do either a magnetic trigger or a wheel.

 

[RacerXJ220]

I'm looking through my hard copy of the actual Haltech E6K instruction manual that came with my E6K which explains that the trigger can be set for multi-tooth, then just wire in the rear cam sensor for the sync, front crank sensor of course.

I imagine I would wire it in and set it up exactly like my Stinger, just because that's exactly how you do it.

Not difficult, yet, took me a minute to understand when I was working on my own car. The first time you go through it is unsure, but do it once and it gets very easy.

I say get the E6K man if you can get it on the cheap.

 

[88supraTT]

hit me up with a pm if you run into problems if you get it, ive had some many issues during the install of my e6x. once you get it wired correctly it runs great