Search results

I’m just wondering if anyone has used one of these, I got mine a couple of years ago but Ive only just gotten around to fitting it. From what I understand it was a pretty strait forward exercise, unplug factory ecu plug in the stinger load a base map (I’m using a 1jz base map) run a wire to an...

I'm trying to track down some boost leaks Iv'e managed to track down all of them exept for one, it seems to be comming from the back of the motor near or from the EGR. Iv'e sprayed soapy water all around the area but cant find it, am I missing something? any help or suggestions would be a great...

I’m looking to upgrade my fuel system before I start doing some fairly big mods to my car. The plan is to eventually have around 450hp at the wheels. I know a walbro would be enough for what I want but they seem to be a bit hit and miss and I don’t want to take any chances with my fuel supply...

I seem to be having with my HK$ wastegate it's not holding boost sometimes and other times it spikes! Iv'e included a pic maybe someone can help. LOL moral of the story use two hands when you carry a cast manifold!:cry:

So much for sunny Queensland!!!!

Hi guys I just need a bit of help, I'm putting my car back together after doing the head gasket I thought I'd marked all the plugs and where they go but I missed one! now I cant remember where this one goes! can anyone give me a hand. Cheers Les

Ive been offered a Holset H1E turbo at a pretty good price and I'm just wondering if it would work on my 7m. Ive searched and cant find much if any info on them. Does anyone have any info on them? from what Ive been able to find out about them is the exhaust housing is pretty big so it would...

Well it finally happened I got the dreaded BHG, well I’m 99.9 percent sure I do anyway. My car isn’t showing the regular symptoms of a BHG, no water in the oil or oil in the radiator, temp is fine no spikes, never over heated. But if I undo the radiator cap while the motor is running I get...

Hi just wondering if anyone can help or offer some advice, I have an OS Giken Twin plate clutch. What’s happening is I’m getting a random grinding noise on take off it seems to be worse when the clutch has been driven for a while, it doesn’t happen when its cold. The clutch seems to hold well...

I took my car to the drags for the first time on the weekend. It’s a full weight ma70 5 speed 7mgte with 340-rwhp, dyno sheet below http://www.supramania.com/forums/showthread.php?t=72758 Anyway my times were a bit disappointing, I understand trying to launch with 18inch wheels is hard and...

Hey guys I’m going to the drags at the end of the month, I want to run my car in full street trim so that means keeping my 18inch wheels on. I know I’m being as stubborn and it’s not a good idea but hey I’m old so I’m aloud to be :). So I was wondering if anyone has had any success launching...

Ok guys there was some talk a while ago about organizing an A70’s cruise, but nothing came of it. So I’ve taken it upon myself to try and make it happen. I’d like the Queensland Supra club to be involved but not necessarily run the event. The date for this run would be Saturday the 26th of...

Hi guys I’m in the process of getting a new motor built for my car, I want to do it once and do it right so I’d like a little advice on the build. I’m shooting for 550 to 600 hp at the wheels once it’s done. At this stage the turbo I’m thinking of using is the Master Power T70 and an EMS stinger...

Hey all just thought I'd post my dyno results, mods are listed at the bottom of my post. My only concern is the dip in hp at around 4500rmp make I think that might be my clutch slipping maybe ? This was done at 14psi [/IMG] Mods: 3inch turbo back exhaust, HK$ front mount, 2.5 Ebay intercooler...

Hi guys I just need a little help figuring out what I have. I bought a ct26 a while ago thinking it was a “Turbo A” ct26. I put it with the rest of my parts without having a good look at it anyway not too long ago I was offered a good deal on a HK$ manifold and t04 turbo, the t04 needs a rebuild...

This has been doing my head in for a while now so I thought I’d ask those with more experience. Here’s a quick run down of what’s happened. Fitted a SAF-C 2, took it in to get tuned and it couldn’t get tuned because every time they took fuel out it the motor would...

Ok here’s what happened. I took my car in to get the SAF-C tuned yesterday. All I’m looking to do is move fuel cut up to 14psi instead of the 10psi I’m getting now. So the dyno operator runs it up onto the dyno does a few runs then heads off to see the boss. He comes back...