Ok, I am diving into a 1jz that was boosted to 20psi with a malfunctioning meth injection kit. It is leaking/burning oil.
The owner had a comp check done and it was good across the board. The shop that did the comp test said the turbo and pipes were clean. I have not pulled plugs yet as it is...
Yeah Jayhall and I are going to drive to Winthrop on the 19th, get lunch and mess around. Gonna be fun Lotsa corners and tunnels. Gonna meet in Sedro Woolley at 9 am. Open Invite just don't be a douche bag. This Road is very unforgiving. I have been on a few drives where people flipped on the...
Has anyone suscessfully swapped in a later model toyota ing switch into their car? My key isnt in the greatest shape,I thought about getting a new one made but this because of the age of the key and the amount worn off over the years, I fear the ING switch wouldnt accept a new key.
Does this...
Am I read the TSRM correctly. You install the pressure plate and disk, Then mate tranny and motor . Rotate crank and bolt flywheel bolts one at a time?
Has any one successfully soldered onto the OEM plastic film behind the cluster? I recently swapped on gauges and they interfere with certain functions that I would like to retain. So either I completely rewire it all or I bridge the broken connections. Any input.
I am in need of any line drawings that you may have of the MKIII. specifically the rear. I am doing a CAD project and need them. I searched and didnt find much. and one have any leads?
I am stripping down a set of Knuckles and as per TSRM I am " supposed " to use all these different SST's ( special service tools). Which isn't going to happen. :aigo:
What I am wondering is what DIY tools have you used? Knuckles are off the car,the dust cap is removed, and the locking 36mm...
So after a day at the track with Jayhall and another Supra owner. I was decided that we needed Modified Knuckles to increase steering angle. I talked to a friend who works along side Xecessive manufacturing about getting some made. I was informed that they would not be Re welded stock's, but new...
Wondering what if any difference I can expect by having switched from a W58 to an R154. I have a Bpu 1jz and a 4:30 NA rear end. I notice the gear ratios are different between the trannys. I have also heard that the R154 is more knotchy,but what I am curious about is power and drivability .
I have recent contacted Big Country Labs about creating a GT wing for the MKIII. These wings are rad> They have to sizes avaiable FD legal and Manly size which is 2.5 inches taller. Now these wings are Tall as fuck and are wide as rosie o'donnells ass. If you don't have balls don't bother. We...
I am goofing around and am building a front brake set up. I am using a Toyota 4runner four piston caliper and a bracket made from 1/2 in aluminum. I need a 13 inch rotor that has the same dimensions as the stock rotor. I prefer to get one from a salvage yard because this is for...
I have a PPS rack with the plugs still attached. PPs computer is still in the car. It has been disconnected since my first 7m swap in 06. I am doing alot of cornering at lower speeds and need the assist.
Going from this.
I need to make/source a plug with wires running from the B3 plug...
Just let me friend drive the Supra so I could she her for a different perspective.
http://www.youtube.com/watch?v=YmfGsC6Yps0&context=C29216ADOEgsToPDskIyC0xTd2ysh_BKMvpZq7m4
My front splitter is only 3 inches from the ground. :aigo...
Which direction does power travel Mrel,B+1,b1 ect.
I have some electrical gremlins going on with my swap.
Last weekend I was out driving and taking corners pretty good. All of a sudden the car died and the fuel pump was done.Got it home and found no juice to fuel pump. So I...
I am removing the stock twins from 1j while it is still in car. I have one bolt left. It is the rear bolt on the underside of the rear turbo. I removed everything including waste gate. It is a real bitch to get to.
Any Ideas?
Tips?
Tricks?
I am sure it would have been easier to remove...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.