I have been thinking about adding methanol injection to the Mk3 Supra.
Main reason for doing so is to safely increase boost to 24+psi. Currently run 18psi max on 93 octane. I was thinking about always running 100 octane but obviously over time this would come out to be very pricey.
I'm...
I have searched the TRSM and also found some good threads regarding how to calibrate the TPS.
However nothing covers installing the actual TPS sensor.
I am using the RMR Throttle body with Toyota TPS adapter.
Does the TPS need to be pre-loaded or not?
I have a custom fabricated FFIM and RMR Throttle Body. Once everything was installed I fired it up. It started and immediately revved to 5k when I shut it down. The throttle plate is closed so its not a cable issue.
I am leaning to the tps. How can I fix this. If the tps is reading a higher...
Does anyone know if there is a compact version of brake booster for 92 turbo?
I am also looking at this brake booster delete by Chase Bays. Anyone have any experience with this?
Thanks
Prepping for FFIM install soon. I have a few questions.
How do I remove the throttle cable? Is there any DIY pages here with pictures. Or if anyone has knowledge of the step by step process?
*Edit* I was able to remove the 2 10mm bolts on the bracket securing cable running thru the...
I'm looking for the part # for the four nuts that secure lower intake manifold to studs coming from head. Looks like the nut has a built in flat washer secured to it.
Thanks Supramania
As we all know, SupraSport has been a premier aftermarket shop for our generation supra and has helped me a lot in my series of upgrades.
I have been watching their FFIM Cast Production from the get go many years ago, but the final product never made it to production.
I for one would love...
How do I make the A340E lockdown/kickdown cable work with a FFIM setup. Oem throttle body and linkage will no longer be used.
Who has auto Supra with FFIM that can chime in.
Any input is appreciated.
I am removing the stock oil filter housing and oil cooler for a remote thermostat full flow system.
I have done my research and seen Jdub awesome thread. I still have a few concerns.
TSRM Bolt #15609G...is this the only bolt holding the oil filer housing to block? Any tips on removing...
Little backround, I am currently runing coilovers on stock size wheels and tires. I have 17x9 +35 and 17x10 +20 wheels on the way and they will be mated with 255x40 and 275x40 tires. I will also order the poly bushings kit for front and rear along with new OEM front lower ball joints.
Right...
Anyone running the Canton Racing Oil filter?
Im looking into the CM 400 Series Spin-On Inspection Oil Filters (6 1/4" Tall). Havent read much about it here in the forums.
I will be installing a full flow thermostatic oil cooler and am trying decide which oil filter to use.
Is this...
I plan to add a Hayden tranny cooler in addition to the stock cooler inside the radiator.
For anyone who has this modification done, can you post picturs of how its routed with the internal radiator cooler.
Hey all,
I have a problem with my air conditioner. The blower works however the air does not get cold.
What I have noticed is the fan #3 identified in TSRM does not kick on. ( The one behind the bumper near intercooler) Could this fan be the reason the AC does not get cold? Fan #1 and 2...
What is the psi rating for the pressure sensor that comes with the vpc?
I know they sell aftermarket 30psi rated sensors.
I heard the vpc sensor reads up to 25psi?
Anyone know the right specs?
Below I have attached a picture of my CPS.
I am getting a continuous whining noise that I beleive is coming from the cps.
Is there supposed to be an O-ring at the end of the shaft after the gear?
If so, could this cause an abnormal noise?
Thanks for the input!
I am just curious as to whether anyone has tried this and if it even works.
Our only upgrade option for the MK3 is the 550cc injectors chip.
Would it be possible to run the 680cc chip made for the MK4.
If not, I guess it would be safe to say the Mk3 VPC is limited to 500rwhp due to...
What size flare wrench will I need to remove the fuel filter? Opposite side of the banjo fitting.
13mm or 14mm
I removed the gas tank today and installed a walbro. Next sat I'll change the filter and bolt the tank back up but I gotta make a trip to the store sometime this week for a...
I just want to confirm my information is correct as well as ask a few questions on the areas that are a bit fuzzy to me.
Car- 92 7mgte
So I have a VPC that I will hardwire in conjunction with the safc2.
VPC wires...
Red- Power
Black- Ground
White- Ignitor
Brown- NOT USED, for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.