CSI Delete at fuel rail

[blk92suprat]

Does anyone sell a bolt/block off to delete the csi connection at the fuel rail? If not, what size bolt would I need?

Thanks in advance!

 

[Nick M]

Won't you find out the size of a bolt when you unscrew it?

 

[blk92suprat]

Inquiring if there is a bolt/washer sold by a vendor specific to this or if anyone knows size of hand to avoid sourcing out at hardware store. This way I can eliminate fuel leakage during removal if I have the bolt to drop in advance.

 

[jetjock]

Won't be any leakage if you bleed the pressure off...

 

[blk92suprat]

Won't be any leakage if you bleed the pressure off...

thanks, no leakage.

 

[andrew_mx83]

Should be m12*1.25
Use a cap head or button head screw and an alloy or copper washer under the head to seal

 

[jetjock]

thanks, no leakage.

Yep. FYI for next time:

1) Let the car sit until it bleeds off. Crude but effective.

2) Unplug the fuel pump relay and let the engine run it dry.

3) Pull a vacuum on the fuel regulator for 30 seconds. Imo that's the best way.

 

[blk92suprat]

thanks for responses! much appreciated