Search results

Here is where I will be ordering. http://www.summitracing.com/parts/HDA-679/

Are you running OEM tranny or have you modified valve body and converter? The OEM tranny cooler is full flow system unlike the engine oil cooler which is pressure based. Is this correct?

So the consensus is to ditch the stock cooler in the radiatior and run a dedicated external cooler. My Hayden is 11.6x11x.75. Sufficient for dedicated cooler? Is it recommended to plug to OEM radiator tranny ports or puchase a new one that is designed for 5 spds(no internal cooler). I lke...

Do you have it mounted with the face down?

I hear ya, pressure check next on the list.

Anyone running the Canton Racing Oil filter? Im looking into the CM 400 Series Spin-On Inspection Oil Filters (6 1/4" Tall). Havent read much about it here in the forums. I will be installing a full flow thermostatic oil cooler and am trying decide which oil filter to use. Is this...

Update: I was unable to work on the car this past weekend. When schedule permits, I will get to the shop and test the system for pressure. Does anyone have any spare r12 cans laying around in their garage? Might be a short cut to my solution??

I plan to add a Hayden tranny cooler in addition to the stock cooler inside the radiator. For anyone who has this modification done, can you post picturs of how its routed with the internal radiator cooler.

OP any update, did you go with Porters Stage 3?

Appreciate the responses guys. Flow lines do not get cold and there is no cold air by any means. Checked all relays and fuses=everythings good. However, the magnetic clutch relay connection appeared to have some corrosion. If time allows this weekend I will test the pressure and see...

Requires r12. When I look at the sight glass in the refrigerant resevoir, I dont see any bubbles. This could mean I am empty on refrigerant..which leads me to believe there is a leak in one of the seals. Hope this is not the case. I dont have the manifold gauge set to test the charge, so I...

I have a 92, there are 3 fans in the bay related to the AC system, as well as indicated in TSRM. Not sure if your referring to something else.

Yes, the compressor kicks on.

Hey all, I have a problem with my air conditioner. The blower works however the air does not get cold. What I have noticed is the fan #3 identified in TSRM does not kick on. ( The one behind the bumper near intercooler) Could this fan be the reason the AC does not get cold? Fan #1 and 2...

Arent the Stance spring rates too high in the rear in comparison to the fronts? Just to add, I run Megan Tracks for over a year and none have blown. Just my opinion but from what I have read all the asian coilovers are pretty much the same as far as adjustments and design go so choose one...

Hks SSQV flutters at low boost or part throttle releases. I hear its normal.

Nice to know 2 bar is more then enough for me... Thanks

What is the psi rating for the pressure sensor that comes with the vpc? I know they sell aftermarket 30psi rated sensors. I heard the vpc sensor reads up to 25psi? Anyone know the right specs?

Here you go http://www.supramania.com/forums/showthread.php?t=89928

I guess I'm a late subscriber to this thread but I have the same turbo as you. Have you had a chance to test it out yet? I'll put fourth some input once I put the insurance back on. Been building this baby up for the last 4 months so its been sleeping in the garage all this time. Just a...