Search results

Car is 1jz, pt6265, rc1200's, walbro 450, e85, ngk iridiums gapped at .024, 1zz coils, haltech ps2000. Now the car will pull fine sometimes but mostly it will cut/lose power at 5000rpm to 6000rpm then power with come back like someone hit the Nos button. I have no idea what it could be, I've...

First off this is what I have done to my car -1jz single 6265 -new coils(no cracks) -new plugs bkr7e gapped at .027 -13lbs of boost -stock injectors -walbro255 -safc2 tuned. Now for the problem, if I Try to run any more than 13 lbs of boost it will cut like its blowing spark out...

im looking to fit 17x9 front with 25mm offset and a 245/40/17 tire and a 17x9.5 rear with 30mm off set and 275/40/17 tire on eibach springs.. how will this fit on a mk3 thanks corey

Anyone had any experience with these cams and shimming them? I have stock 1jz cams that have had the base circle ground down giving my cams more lift and duration. Reason I'm asking is that I am going to shim them and I have a huge gap between the cam and shim that's there. Idk if they make a...

hey, im throwing around teh idea of full cnc'd billet valve covers block off plates, or coil pack covers or any other parts? Reason im asking is that i have the resources and machines to do this, I work at a high precision machine shop and wanna start making parts that people actually want...

i was looking at buying this turbo http://www.ebay.com/itm/Borg-Warner-Turbo-S300-S366-91-79-Extended-Tip-/220790098939?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item33681d8bfb#ht_500wt_1054. has any one had any experience with it? also what do you guys recommend for a 600hp range turbo?

what would you guys suggest for me to run for a 600hp 1jz on e85? I wanna run a single -8 feed and a -6 return. so should i run dual walbros? walbro with an inline Bosch 044? one Bosch 044? mk4 intank with inline? dual bosch 044 intanks? thanks corey

I'm looking to put down low 600hp, Wich one of these options would be best? The dritfmotion dm67 kit or a precision 6265 both on e85? 1200cc injectors Dual Bosch 044 intake pumps -8 an feed 264 cams 4 inch exhaust and DP Map ecu2 E85 15-30psi of boost I know the 6265 can do what I...

first off i have 3.5'' turbo back, 264 cams, on 12lbs (for now), stock injectors. im running on fresh bcpr7es gapped at .028. Right now it idles around 14.8af-16 af on my wide band. At wot in third gear its 11.5af-12.5af up to 4000 rpm then goes pig rich at 4500rpm (10.2af-10.5af) and looses...

ok well i have the car cranking but i have no spark, Ive checked fuses, grounds, i have fuel, i haven't checked if i have power at the ignitor or ecu. someone show me how? also i have no cel light when the keys in the on position? does that mean bad ecu? (ill have to open it up). also when i...

i checked grounds, battery, starter, fuses.. what else? i get power to the fuel pump, dash, pretty much everything else works, just when i go to start the car i get a click, engine doesnt turn over. i hear all the relays turn on like normal, i just get nothing but a single click from the...

i have everything pluged into what i can plug into and i have these left. its a 87 turbo mk3 with a supra 1jzgte

im stumped on what these plugs are and wondered if anyone could help. also where can i buy the locating pins that locate my pressure plate on my flywheel? thanks Corey

im looking into buying driftmotions dm67 kit and was wondering if anyone has had any luck with their turbo kits (dm57,dm60-1)? also what hp numbers am i looking at with that kit? i have 550's,mk4 fuel pump, 264's, 3.5inch exhaust, fmic. tnaks corey

I was wondering what can I expect from my 1jz with the folowing mods. Full 3.5 turbo back exhaust, hard ic pipes, bov, filter, and 12 lbs of boost? Also wat would be the best way to tune it? Map ecu, emanage, safc? I have a wide band and boost gauge. I'm leaning towards a map ecu because you can...

what is all required to have no powersteering on a mk3 with a 1jz? it it a matter of just plugging the holes on the steering rack? what serp belt do i use? any help would be great thanks corey

what the correct way to hook up the fuel lines in a 87 supra that has a 1jz? will the 7m oil pressure sender fit it i dont have the 1jz ac compressor instaled? can i just swap a 2jz water pump, fan, and fan clutch on to the 1jz? thanks corey

i have the stock rad, fan, with pump, resvoir, and of corse the hydro water pump on the engine. what else is there? thanks corey

my winter project starts out with a clean clean 87t 7m shell i bought for $500, with a 5 year old paint job also it came with mk4 wheels, apexi shocks with eibach springs, braided brake lines, full interior, 3.5inch apexi exhaust and a 20k mile r154. i picked up a 1jz for$900 that has only 7k...

im putting a supra 1jz into a 87 mk3 and have a question on thses sensors from the stock 7m. do i need these with the 1jz? thanks corey