7mgte

Check engine light came on and checked the codes I got a 52, 71, and 34 I am not really worried about the 52 or 71 But the 34 is scaring me a little bit 34 is something about turbocharger pressure I assumed it was because I just recently Installed a divorced down pipe But now I am...

I installed a BIC DDP and a Vibrant Muffler on my cooleze exhaust and now when I let off the throttle a puff of white smoke comes out. I have read several threads about white smoke and most people say turbo seals...but usually the smoke is discribed as "lots of smoke" or "smoke pumps out the...

Hey guys I have a couple issues going on with my supra post rebuild. Any help from the superstars on this site would be greatly appreciated. First off mods list. 1500 Miles on full rebuild. 7mgte Block bored with head for Cometic MHG ARP Bolts Probe .40 over Pistons AEM AFPR ARP Internal...

Hi everybody my names Jason im 25. this supra is the 7th car i have built. I drove a jeep wranger yj on superswampers 6 miles at 55mph on the off chance id trade.i thought i would die the entire trip. gold wheels tinted orange

Hello Supra owners! Can anyone tell me what are the difference of the 87 7mgte to the newer 91 7mgte? Difference about the head? About the Block? If there are any... I have an 87 GTE Block at home and I'm planning on swapping the block to a 91 Turbo Supra. 91 Supra has a hole on the...

Ok Solved all my recent problems due to BLOWN TURBO Gt35 t4 Godspeed turbo. I got a replacement, and used the correct oil feed restriction flange this time. http://www.youtube.com/watch?v=YGzEWbWvMV8 Now I have an oil leak, but its not coming from the turbo oil seals, not from the feed line...

Looking for a 7MGTE complete engine, anyone selling or point me to a good place where i can find one? Thnx

Soo as the title states I have a 87 supra "drift" car. I have been building this car for 2 and a half years now. The engine is the 7mgte with JE pistons 0.040 over with eagle rods and clevite bearings block is machined, cleaned, decked balanced blah blah blah. The head is stock just cleaned and...

So, I've found a 7mgte complete motor online for $500. Owner said it has about 110k miles when they pulled it out because he wrecked his 87 MkIII. :3d_frown: The only missing from the motor is the turbo and the wiring harness. * Here is where I need a second opinion from the community *...

I just bought my first 1989 MkIII Supra earlier this year and it's an NA. It's a 5 speed (W58) with a stock LSD Differential. Currently, my 7MGE runs but it blows white smoke on a cold start. I don't wanna mess with it but any kind of info about fixing the white smoke would be good...

Alright everyone it's been awhile since I've posted on here but I got my build complete'd and have finished breaking in the motor. Now I'm starting to work on tuning it, but as soon as I go into even low boost (2-4psi) the fuel pressure drops all the way down to 15-20psi. I've tried adjusting...

:: angry :: I am driving and the car stops accelerating just before it hits 1PSI of boost. Runs rich, wont exceed 3500rpm, backfires, cuts fuel without CEL blinking. Boost no longer runs because the engine will not exceed 3500 RPMS Is this fuel Cut, Is the ECU freaking out? recognizing...

1987 Toyota Supra Auto Transmission A340E + 7MGTE w/ Aftermarket turbo Rebuilt internals 9K on engine rebuild. 3" Intercooler Pipes + Intercooler HKS HeadGasket ARP headstuds 90lbs ft/lbs torqued Walbro fuel pump 550cc inj Adjustable Fuel Pressure Regulator Lexus Air Flow Meter + K&N...

Dropped a built 7M in not long ago. Typical build: reconditioned head Probe .20 over forged pistons Eagle rods Polished crank Block and head machined Cometic 1.3mm head gasket Now the issue is it seems to lack power. It felt quite a bit quicker with the tired old motor! It had code 51...

I was just wondering what your stock 7mgte dyno numbers. I had my mk3 on the dyno the other day 230 hp 340 tq. Its competly stock expect for a 3" exhaust. Is this what you guys are around?

Sorry guys, I have a noob question. I've noticed that when a lot of 7M guys install a big turbo, they have a 4" intake with a big K&N filter; but the AFM is gone. How does this work, or where did the AFM go? Thanks, Jordan :)

I have a 86.5 non turbo supra that now has a 7mgte motor with all of the 7mgte electronics(wire harness, ecm. etc.) I had to make my own harness basically from scratch using the harness from the 7mge and the 7mgte. I also installed a AEM FIC, waiting on a few parts that i have ordered to see...

87 7mgte auto, Just did a fresh complete rebuild. only mods are 3" turbo back and hks ssqv. So heres the Short story. installed cam sensor at tdc like every other time(nothing out of the usual), and started right up and actually ran great. I didnt have a timing light at that time so i drove it...

How's it going everyone. Well, I just purchased my first supra last Tuesday. Already got the BHG, but I plan on fixing her up. She is a 1988 MK3 7MGTE Turbo. Only downside in my opinion. She's an automatic, but again plan on changing that. Anyways I've always been a big fan of the Supra and im...

I am getting the R154 tranny because I need a new transmission and also because I plan to get a better engine. I just want to know which bellhousing I need to get, if any, that will fit my current engine (7MGE) and also the (7MGTE or 1JZ).