Search results

  1. viperkillertt

    BAD DAY! MY 1JZ MKIII was stolen and wrecked today!

    Wow, today has been bad. Well at least the start. I woke up and was heading to work. I stayed at my girlfriend's house last night. I parked right in front of the door pretty close to a street lamp. Well, i am putting on my shoes and i look out the front door window and i didn't see my car. So i...
  2. viperkillertt

    Fix for Error Code 42: Speed Sensor Error

    Hey, I have had issues with the darn speed sensor for about a year now. It only acts up randomly, but really sucks on long trips. My car does have ABS installed, but because my tranny is JDM, i dont have the sensor in the tranny for the ABS to function. Anyways, the cruise works fine sometimes...
  3. viperkillertt

    Cruise Controll Problems on 1JZ SOLVED! AUTO to Manual issue.

    PROBLEM SOLVED!!!! : So if you have a car that was originally an AUTO, there is a pin 6 and 8 that will still be connected to the Cruise Control ECU. They are suppose to be connected to the AUTO tranny ECU. That is gone now, so it screws up the cruise control ecu. Remove the 2 wiring pins from...
  4. viperkillertt

    1JZ supra wont start in the morning when below 40 degrees

    Hey everyone, OMG! I have had the worst winter with my supra. In November the supra wouldn't start on random mornings. I thought that i had let the fuel tank get too low and so it got a little condensation. So to fix it, i just started keeping my fuel tank above 1/2 mark all the time. Well, that...
  5. viperkillertt

    Megasquirt on a 1JZ/2JZ with Stock ignitor Discussion

    Hey guys, Well, over the last year i have been messing with the 1jz and a Megasquirt. I finally gave up a few months ago and switched to a EMS 6860. Well, i just found out something very helpful for future 1jz MS people. The stock ignitor will not talk to the MS straight across because it...
  6. viperkillertt

    EMS Stinger 8860/6860 1JZ Base settings and ECU help needed. :(

    Hi, I just got my 6860 today and i have been looking for some base maps to play with. I have one on the ecu right now, but i havent found much online. http://www.enginemanagement.com.au/maps.php doesn't have anything but the stinger 4428 1jz maps. I know other 1jz guys are running this ecu, so...
  7. viperkillertt

    what is this wire? It is near the Fuse box.

    I just was working on my headlights. They havent been working. Well, i pulled out the battery and i was fussing around and i found this wire that was disconnected and it looks like it should either be in the fuse box or on the battery. I have a 1jz and i might have disconnected it for some...
  8. viperkillertt

    No start issue randomly

    Hey guys, i Know there is a thread on here about this. Me and Justin were talking about it last week. Anyways, i am having the common issue that it randomly doesnt start. I believe it is usually when it is warm out. I have never had this issue in the cold. I totally forgot how to fix it. I...
  9. viperkillertt

    Who repairs bad 1JZ ECUs with a possible trace issue?

    Well, last year i talked to a guy who was new on our forum but a vet on another forum. He was a great electronics guy and he said he could repair my blitz access ecu for the 1jz. Well, i just spent an hour going through every post i had made in the last year and every PM looking for his contact...
  10. viperkillertt

    One More Garrett GT35R Question and EX Housing poll.

    Another quick question, and i made a poll. I was talking with my supra buddy tonight and he got me worried about something. What is involved with changing the exhaust housing on a GT35R? I assumed that it just required changing the housing. He was under the belief that you have to change the...
  11. viperkillertt

    Fuel Injector Flow Testing and Cleaning Thread

    I have been searching for quite a while and i have found a great page with all the info. I might have missed it. I found this one:http://www.supramania.com/forums/showthread.php?t=66428&highlight=flow+test+injectors I wanted to get peoples thoughts on which shops were best for injector cleaning...
  12. viperkillertt

    GT35R 1JZ Build starting

    Update 05/16/2009: I am making this my new Build thread. It is a continuation of my original thread :http://www.supramania.com/forums/showthread.php?t=43837 Well, i finally got my GT35R and well now i am really confused. It almost looks like someone took a dremel to the end of the shaft. Does...
  13. viperkillertt

    680cc Injectors for 1JZ, other then Venom

    Hey, I finally got my dream Garrett GT35R, so it is time to complete the job. I need some new injectors, wastegate, and fuel pump. My main question is about these injectors i have found on ebay. Has anyone used them. Do they work with the 1jz fuel rail well...
  14. viperkillertt

    Do you think i need new brakes? :)

    Wow, well, for the last 2 weeks, since the weather has been nicer, i have been hearing a slight whining sound that happens when i turn to the right. It sounded like bad rotor being scraped. I took my wheel off and checked it out yesterday. Well, yeah, i think they are shot. :) Here are a few...
  15. viperkillertt

    Need help with a turbo that i bought. What is it? GT35R?

    Update 5/3/09: I found another GT35R. I uploaded pictures, they are on the 3rd page. Thanks for looking and helping me find a good turbo! Hi, I bought this turbo. It was suppose to be a gt35R as i have been wanting for years. Well, the markings on it make me a little confused. It also has a...
  16. viperkillertt

    Wanting cool 1jz or supra stuff on ebay 30% off? Microsoft Cashback is working now.

    Hey guys, I just wanted to let you know about the Microsoft cash back program. They are currently giving 30% off on any buy it now product on eBay, so obviously it is for more then just supra parts. It is fricken awesome and so i wanted to make sure the 1j/2j guys know about it. Here are all...
  17. viperkillertt

    Fuel Cut on Stock ECU With Boost Controller off

    Hey, I have been having a few issues lately. Well, my Blitz ecu died 3 months ago and after working on my Megasquirt build for 2.5 months, i had to throw in the towel and get a stock ecu so i could drive my car home finally. Well, before i left Spokane I went to the track to have some fun. Well...
  18. viperkillertt

    Anyone else have issues with their fuel gauge on MKIII- Question Answered

    I finally got my supra back on the road, but all of the sudden, i have noticed the fuel gauge wont go full. I went and fueled up last night and it only went up about 3/4. So then after 7 miles of driving, i fueled up again and got almost 1 gallon in, but it still wouldn't go up any more. It...
  19. viperkillertt

    Funny new 1jz ebay shirt. Anti-v8

    Hey guys, i found this awesome new tee shirt on ebay today. It was found in my standard searches. I thought it was cool. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160277901380&ssPageName=ADME:B:SS:US:1123 Hope you all enjoy. I might even get one. I could see myself wearing it. A...
  20. viperkillertt

    Anyone using the Bell Engineering FPR?

    I have a co worker talking about the Bell Engineering FPR. Does anyone have any thoughts on them? We might be putting it on my custom side project. Also, if they rock, i might grab one for my 1j. Has anyone here used one? I have only dealt with Aeromotive ones. Thanks...