Search results

I got beat.....We went from a 60 roll and I got the jump right away, a half a car length. I had him all the way through 3rd and when i shifted to 4th he started catching up. By 110 mph he was ahead by a half a car and then we had to get on our brakes pretty hard. No idea on the size of the turbo...

http://www.youtube.com/watch?v=RtPKWDryq6k 400K though?

Hey guys!I am using the q45 tps with the maft-pro and Im having serious issues with drivability. I could be cruising on a hot day and see the ohms of the tps jump from .38 to 1.28 in a flash. The problem with that is that my WOT readings are dialed in at 1.2 on the maft pro. So I am cruising...

Im going to AN fittings for the PCV system.....I am wondering what size I should use....I tapped the valve covers for 1/4" but its looks like it may be too small paired with -6 line. What about 3/8 and -8 line? thanks

I just got my BBA from the University of North Florida! Too bad it happens to be during an economic crisis....:3d_frown: Luckily i have a job! Law school is next! Expenses never end, Im finding this out the hard way!

Hey guys! My Q45 TPS is bad and I was wondering if someone knows what year TPS we can use off of the Q45. I know that there is only a particular kind that works but down know which. If anyone has a part number that would be great! I tried calling an Infinity dealer and the parts guy there was...

Hey guys! I am getting a code 22.... which is the water temp signal to the ECU. This is causing my car to run like crap as it keeps idling up and down because the ECU is not getting a reading from that Temp sensor. Also it causes radical AFRs when i cruise as i can go from 15.6 to 10 at a blink...

Hey guys! I am having a "sensitivity" problem with the maft-pro. More often than not when I pick it up to change the settings my car will almost stall out. It seems like the problem is in the 10 pin harness. I checked the ground and it seems to be okay. It feels like it is shorting out somewhere...

Hey guys ! I am using the Q 45 TB and am having a problem trying to figure out where my TPS should read at idle. Currently I am at .28 volts. I know when i had my old TPS I was reading closer to .4 volts at idle. I read X-Man's post about install (which is exactly how i did it) and he says that...

Alright so i have put about 100 miles on the car since i finished timing control/FFIM mods. During the initial start-up i had no problems with fuel but yesterday when i parked the car i noticed a very intense smell of gasoline coming from the motor. So i look around and see a small puddle of...

Hey all! So i wired in the timing control on my 91 Supra....here is the diagram that I used...http://s230.photobucket.com/albums/ee37/black87turbo/?action=view&current=supratimingcontroldiagram.jpg I turn the key and the car starts, but will not stay idling....I guess I should add that I have...

I ran out of money for the turbo so i have to tune it the way it is.....With the Precision 680's, RonR FFIM and a stock CT....I have a FPR, walboro and all other supporting mods. I just need a base tune....anyone?

Hey guys I have the RR Long runner and I was and still am at a loss when I mounted the manifold. I have no idea where exactly i need to cut the hole as the TB faces the headlight motor. If some of you would be kind enough to post a link to some pics of how yours routed I would greatly appreciate...

Alright well I am working on installing the alternator drop down tension bracket......the one that sits behind the A/C compressor stock. Well Ron's is designed to fit over the compressor bracket. After having threaded the two bolts that hold the a/c compressor bracket to the block on the intake...

can the maft-pro support these? meaning would i have to run sequential injection or anything to get it to idle normally with these injectors or can I just pull fuel as I regularly would with my 550s?

I am going with a turbonetics T-61, by doing some calculation on the rc-engineering website i am to use 780cc injectors to get 80% duty cycle at 43.5 psi of fuel on my desired HP goal. My question is this: Do i need another walboro to push these injectors? If not, what size injectors require a...

alright.....now that i mounted my optima, i need some help with wiring. I read a great link on MKIII tech.com about doing it but had a question that no one there answered. Couldn't I just run an inline fuse (like this one...

Hey guys! I am running speed density on my maft-pro. Now that the car is tuned pretty well i have noticed that whenever you stab the pedal to the floor it shoots out like a bat out of hell but when i go to put it into third or any other gear when i am on it, i get this lag for about a...

Hey guys, i serached and came up with nothing so i thought i would ask someone who has gone through this before. thanks

By two fox-body mustangs. One was spraying 200 shot with cams, slicks and a bunch of edelbrock parts....and the other was running 325s in the rear with a t-70 and and 150 shot....I was just cruising and all of a sudden they come up on my door from both sides and kinda start giving it gas and...