Search results

Hey guys. Well I decided to add a FPR and -6an lines to help the walbro from whining too much. After everything was done I end up bypassing the BVSV for the stock FPR and run it straight. The FPR is a Professional Product part number pfs-10671 . http://www.summitracing.com/parts/PFS-10671...

Alright I just recently started to smell this aweful oil burning while at OP TEMPS only. The smell will come and go in traffic and on freeway driving its a bit more noticeable. This is of course only when the car hits OP TEMPS. I took off the according tube and found oil sitting on the lip of...

Alright after doing a few test, I have found my Factory 02 sensor is not in TSRM specs of resistence. Looks like I need to replace it. Im skeptical on Bosch 02 sensors. I have looked around online and I can only find walker, denso, NTK 02 sensors. Pricing is quite a difference as I know that...

So today I got my car dyno in. List of mods and more..... Rebuilt .040 probe pistons w/ 2500 miles full balanced HKS downpipe No cat RSR full catback bcpr7eix spark plugs lexus is300 coils stock ct26 with 170,xxx miles cometic 1.4mm blitz sus intake Walbro 255lph w/ rewire 10lbs psi custom...

Hey guys... well My heater core went out tonight. Things that ensured this, coolant smell inside and haze on windows. I want to ask if anyone have used any aftermarket heater cores with good outcome? Ones like from Autozone, pepboys, kragen, napa. I would get it from the dealer, but on these...

SO I just measured my valve lashed tonight and the results are quite scary. This is with a fresh rebuild with about 600 miles on it. Looks like the machin shop f@cked up. Here they are from piston 1-6 Exhaust: 1a..008 1b..011 2a..016 2b..015 3a..018 3b..018 4a..017 4b..016 5a..014...

So I hit the Sac Raceway tonight on my fresh rebuild and basic bolt ons- Suprasport lipp, HKS DP, RSR catback, blitz intake, FMIC w/ 2.5 piping. Best ran at temps of 47 degrees ( YES it was cold... everyone was running slower then they should be) 14.857 at 98 MPH. 60ft- 2.4 Horrible! I...

Sup guys. Well I search with no luck. I'm hitting the track soon and fabing up a nice intake pipe for my stocker. I was wondering if I can vent the ISC to the atmosphere without catastrophic damage. I want to eliminate the hose from the intake to the isc if possible ( less fabing). LMk...

So My dad bought this piece about 7years ago. I don't know what it's called r the maker of it. Can't seem to find it anywhere online. So I need your guys opinions. On or off? I don't really like it, but some guys were telling its better on. Weighs about 8-10 lbs... and professionally...

Well I have babble with this for awhile and wanna see if anyone has done what I did too. According to Haynes you start the torquing sequence on the outer corner studs then work to the middle. On TSRM it starts from the middle out. Not trusting Haynes I went the TSRM way. Could it have...

Hey guys, I have a question about oil coolers and trans cooler. What is the actual difference in them. I was looking into a derale transcooler over the oil cooler ( reason is price). Isn't true that many trans and oil coolers are the same? Any input would be nice, and I have searched, over...

Hey guys, I have looked and searched online with some information. Now my questions is that .20 or .40 which is better. I know that increasing the volume is better for overall power out put, but would it also be reliable as a DD? So my question is .20 or .40 pistons.

Anyone here has issue in contacting sipracingmailorder.com or getting a hold of rich? It seems I don't get any email reply about my order? My machinist is getting very impatient. If rich is here I need those parts asap, if my machinist is gonna start charging me storage fees :icon_evil.

I got that marlin shifter bushing from driftmotion, but having the darnest time trying to removal the two alignment pins for the shifter. Anyone with previous experience please help. Thanks.

Ok I have tried and tried to search on many parts at the dealer and internet. Mostly with no luck. I'm looking for individual ( namely OEM part numbers) parts like oil shaft, hard coolant lines, coolant bypass hoses, coolant banjo on back of head, and many more accessories to address my...

Ok... so the motor is out. here they are............. My previous build... I know not a ma70.. but was a fun build. my FWD DSM... Me drifting in my miata. It was fun..... Ok enough of some of my fun days. Wish me luck. I'm debating on the rebuild of...

Finally I get the chance to work on my ride. Ok ok... no this isn't a question about how to pull the 7mgte motor... but does anyone know the total weight of the motor and tranny together? I'm questimating and don't want to use my old cherry picker on something thats going to be over 500lbs. (...

I'm getting my engine rebuild. I've been looking around and reading alot of great stuff on MHG. Especially HKS, COMETIC, GREDDY. Has anyone be able to use a titan and liked it? My build is a conservative one, with MHG and ARP as insurance. Not looking to go past 12 psi or 350whp. Anyone...

Hey any supra fanatics in the Sacramento area? I need to know a reputable machine shop that knows the 7mgte. Any input would be greatly appreciated. Especially with 7mgtes tight clearances on internals. I've called around a few shops in the area ( i just moved here 1 months ago) and many...

I think my headgasket went tonight. I can smell a faint sweet smell. THis happen when I was coming back from a 145 mile trip. On a normal 65-67 cruising speed, the car lost power. Pulling over to the side, the car dies. Starting was hard as I has to throttle the car to keep it alive. There...