Hi There:
Trying to put an 88 MA70 back together.
Main Hurdles:
- had a kid since unplugging everything, memory is poor
- a/c and other items are gone, so some of these don't plug into anything anyways
- previous owner(s) made a mess, shit was spliced/cut everywhere
- don't have an...
On most Supras I have owned:
1: The vents in the door jams #62850/62860 (see pic) are rotted.
2: The B-Pillar trim/vents #92955A (see Pic) are loose/faded/worn.
Do these really do anything of actual value?
I suspect it has something to do with air pressure when closing the doors but...
I have identified all the wires in the 1JZ-GTE engine harness.
I have also located and shown which wires are used/deleted with the EMS 4424 ECU.
I was able to remove around 50% of the wiring to the engine.
Please use at your own risk. Your results and situation may vary.
See attached .xls...
Pros:
Seats 5
Runs 13's
Intercooled Turbo
AWD
Sleeper-ish
Can haul skis and boxes
Cons:
Is not Toyota
Is a Blazer
Is GMC
Is a Blazer
Low MPG
Is a Blazer
Here's the scoop:
Facebook group for the best, most innovative and most passionate MK3 owners in the world.
http://www.facebook.com/#!/groups/329059720522222/
1. No spam.
2. No shitty Supras
3. No " " owners LOL
4. No MK4's allowed!
Send a pic of your car to be let into the...
Not mine: But please enjoy the link.
http://www.ebay.com/itm/JDM-TOYOTA-SUPRA-JZA70-MK3-REAR-LIP-GUARDS-SIDE-SKIRTS-MA70-1987-1992-TURBO-R-/110851753158?pt=Motors_Car_Truck_Parts_Accessories&hash=item19cf4784c6&vxp=mtr
Self Explanatory:
Stupid Question: Would a Throttle Spacer make any difference on a turbo engine?
They claim to make a small hp increase, installed/sold a few and it made 3hp on the butt dyno.
1. Increases air volume in plenum. I imagine the turbo piles it in there no can't get any more...
Stupid question, but in your opinion which is a overall better concept for a fuel delivery system. The 2 main pumps are real Walbro external 255's. The car needs 2.
1. Leave the stock pump in the tank to feed the 2 inline pumps, perhaps put a surge tank between them.
2. Throw away the...
I have always found that rear A70 Coilovers are too long.
At the top of their height adjustment, they are always way higher than even stock struts.
Then when you fully lower the bottom height adjustment until the damper is bottomed out in the housing, you still can't have any pre-load and...
Getting some new wheels.
My old ones are on a friends' project now.
Widths and offsets will be great.
For MK3.
Some options .. Your opinions?
Work VS-XX
Work Equip
SSR Professor
Work Meister
All fairly common JDM wheels.
Your input...or other choices?
Got a local guy 86.5 7MGE n/a Supra, beginning to get signs of BHG.
I did a HKS MHG back in the day on my boosted builds, but this is just a basic repair low budget.
Just wondering what is the best gasket to toss in, I know some new options in MLS and etc have come out since I ended my 7M...
I had seen a link or two on ebay , etc for the china-style downpipes for single turbo + JZ engine.
I am specifically looking for a 3 or 3.5 inch V-band dp, moderate price.
Links>?
My current throttle cable measures 52 inches from end ball to ball.
My car is right hand drive, and the custom JDM intake puts my throttle way out close to the left headlight.
So I need to find a 72 inch cable, even if my current one had 5 more inches it would have to stretch directly over...
My question:
I have a 4.10 Torsen case/ring/pinion that was OEM in my car (1JZ, R154)
Differential is obliterated, in the garbage
I also have a complete 4.30 differential.
I had planned to put the 4.10 gearset onto the MA70 differential, but it is costly and labour intensive to set...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.