Search results

  1. hvyman

    brake bleeding issue

    No difference from doing it at a shop or at home. Bleeding the system is flushing at the same time. Flushing is the same proccess as bleeding.
  2. hvyman

    Late-89 7mge to 7mgte Wiring Q's

    There is only 5 wires on the c1 connector. For the connector depends which sensor it goes too. Might just needs a spade terminal.
  3. hvyman

    Mystery vaccum hose

    Prolly goes to the washers.
  4. hvyman

    Need some help

    If go back over everything you did recently and make sure everything is right.
  5. hvyman

    Need some help

    Did it start after the gas tank? Did you check for codes?
  6. hvyman

    Engine temp goes up under boost

    Be off for the sensor to go up just because you boosted. Seems like more of a wiring issue unless it's actually overheating.
  7. hvyman

    O'Reilly Auto Parts no longer carrying brake pads

    Parts guys could be retarded as well.
  8. hvyman

    Engine temp goes up under boost

    Like fast or you boost hard and the temp rises and you coast down it coils down?
  9. hvyman

    O'Reilly Auto Parts no longer carrying brake pads

    Personally I wouldn't use any of those anyways. Only decent ones are the posi quite ceramics. Rather use oem Toyota or Trd or ebc.
  10. hvyman

    Engine temp goes up under boost

    How do you know it's not over heating? Need more explanation.
  11. hvyman

    Clutch replacing question

    You got lucky or parts are worn because they don't come off easy.
  12. hvyman

    Clutch replacing question

    It's easy. Turn the crabk and tighten the bolts through the wholes. Maybe you have a w58 transmission?
  13. hvyman

    Fixing a broken coolant temp wire connection..

    You can just crimp a spade terminal on the wire.
  14. hvyman

    Clutch replacing question

    Its in the tsrm. thats how its done from the factory. and most of the time its a lot harder to get in and out with it on.
  15. hvyman

    Clutch replacing question

    7mge you can leave it. 7mgte you pull the pressure palte with the trans.
  16. hvyman

    what is the difference between a chasers or soarer 1jz

    chaser is front sump. soarer is rear sump. they tag allsorts of things in ebay. just look for a 1jz engine in general. supra soarer chaser what ever doesnt matter.
  17. hvyman

    2JZGE oil relocation fitting

    Titan sells a stud. as the jz engines dip in like a inch -inch and half. so you need like a 2-3in stud.
  18. hvyman

    Oil Cooler Question

    Hes talking about the factory auto trans cooler in the radiator. Nothing. Factory jz use a coolant cooled oil cooler.
  19. hvyman

    755whp 730wtrq at 39psi STOCK 1JZ!

    That's a sweet sound. How high were you revving too? Seemed like the longest dyno pulls ever. Lol. What's up with the different colored front end too?
  20. hvyman

    Steve's mildly out-of-control build

    Should be able to get a 3.58 ring and pinnion from wier. I drove one car with the sogi shifter and IMO it was the worst thing ever. I want a short shifter close the steering wheel up high.
Top Bottom