Search results

If the wheels are 3 piece you could get custom barrells made to what ever offset you wanted. Can be a bit expensive tho.

.84 divided will spool about the same as a .63. Usually helps if the manifold is divided tho. And if he uses the qsv then he is already setup as the .63 is un divided

1jz with stock ecu you will hit fuel cut at about 14 psi. safc should be tuned to your car.

How high are you going to rev? 9 or 10? Looks pretty impressive.

Do you have all the metal mouting brackets for it?

^ thats the top mount not the perch. The perch is where the spring sits on the bottom. They come off with a couple wacks off the stock shocks.

3rd gear pull?

Tial are some of the best wastegate prolly the most bought. Even used you can still buy all the pieces of it seperatly and rebuild it. No reason to get rid of it. Also for qsv you will need undivided manifold and divided turbo.

Could be a bad diaphram or torn diaphram on the wastegate.

Once your into boost you basically stay in your power range until you lift. So it's good for off the line and you might just be spinning the whole time. There is also anti lag and launch control for having power sooner as well as qsv. And personal choice. Also there's compound turbo setups...

Pid?

Lot of time and custom fab. More weight.

For most applications near stock sure. Once things start getting modded better to have a mls but that requires a rebuild.

You can get flourescent needle paint. they just pull off. I set them on there barely and check there position and then push them down all the way when installing. dont seem to have much of a problem with it.

Better to just find a new light failure sensor than to bypass it. Avoids hacked up wiring problems.

Thats a personal choice man. Me personally id never buy targa again. Too much head ache and i never use it.

Nicè!

Check the little wire on the positive terminal. It powers the fuse box which powers everything.

A borg warner sx300(aka s360) would suit you.

Look on eBay. There about 25-30 each. It's just a 6x7 h4 housing that you want. I have glass housings. It doesn't destort it all that bad.