Search results

I have mine installed correctly. I have it to run from the starter to the IG2 switch (When you actually start the car) with a relay installed. I checked out the usual spots too, the VSV, o2 wiring. All that stuff seems to be good. The wiring on the intake manifold looks ok, the tape is all...

Nope still doing it....should the efi relay (the one on top of the efi fuse) be getting hot? Is there a chance that the relay is bad?

Hey thanks Jdub. I think so too, I rewired it to a button, and it doesn't seem to be doing it anymore. But the thing is that it only blew the fuse once or twice, not all the time. Hmm weird

ok guys, my car stays running after I pull the key out, and wont shut off. i can hear the starter going for some reason, if I keep fiddling with it, or try to stall it out the starter kicks over. I rewired the starter a few days before, but it was good. Now, after i get her shut off, the...

I was at the yard yesterday and a 95 ES300 was out there with a wasted spark setup, and it even uses the same plugs too.

that's what i needed but mine is an 88 argh. I looked at the tewd, but the wires are different....

it's not that I want a new one, but I extended out the harness for my IS300 coils, and i don't want to put it back together, and have to take everything back apart cause the order on the coils is wrong. I just need to know what colors go to what coil pack.

Hey guys, I'm in need of the coil pack wiring. I made a stupid mistake of lengthening all my wires without really thinking. On the coil pack wiring, I have four wires;black, white, tan, and green. The tan parts out three ways, and pairs up with the black, white, and green wire for the coils...

Ok guys I'm getting PO'ed I can't seem to figure out the darn wiring. If someone can tell me what what wires on the coil pack harness, that'd be great.... Ok I have a tan wire, that parts into three. Now I have a green, white, and black, which coils do these wires go to? I extended the...

Yeah that's what I did, just to the IGN switch. How long has it been wired like that?

Were you able to purchase a new one locally??

Ok guys, after jumping the blue and black wire (going to the circuit opening relay) it seems that is the issue I was having. Where is the location of this relay?

oh it's a 2jzge, powered by 7m electronics. Everything is from the 7m, ignitor included.

CPS works, I replaced it earlier this year with a known good working one. When I first got the car running (purchased non-running) it worked when I drove it to the muffler shop, after that, no longer worked. And sometimes it would come on, and sometimes it wouldn't eh

Yeah the bov is for sure leaking, from the flange, so once I start doing my IS coils and fixing some new problems that I have now (ugh wtf), then I'm going to physically weld the bov to the pipe. On the ignitor rewire, I've already done that.

Doh! I just realized that the coils only have a single plug on them. For some reason I kept thinking that the coils had their own plug. After receiving my IS coils today and looking at my coils on the car, I came to that realization. Sorry guys lol

If it's not one thing it's another. 2jzgeT with 7M ELECTRONICS. Today the car wouldn't start, figured out the signal wire on the starter was no good. Put new wire on the starter, and jumped to the IGN switch. Cranks great now. So no start, the car ran yesterday! There's no fuel pressure...

I've been to the event in texas a few times, this last time they canceled cause of bad weather.

Hey josh, how much that driveshaft cost you? have you gotten it in? I hear solid driveshafts like that make a lot of noise.

ok so 1,2,3 are coils, and 6,5,4 are wires correct?