I have install a new wheel bearing and bought new axels. so I put everything together and bearing spends freely but when I have the seals installed and put new axel in and tighten axel nut its like it gets seized up and wont spin. but if I pull the inner seal out and re enter the axel and...
So im in he process of installing ES bushings and realized the rear tie rod end is worn out I've been searching and I can't find a oem replacement rear toe link. Not sure if you can just replace the tire rod end or the entire link. Anyone have a part number to replace this. Thank you
i have searched alot on google and can find the threads but not really any part number to make sure which will work and which wont. i have tried using the search button for some reason my search is not working. i have looked up on advance a mustang cobra. and found calipers for left and right...
i have searched and couldnt find anything on it. but does anyone have a write up on how to install the poly bushing in the rear i have already replaced the control arm bushings but none of the rest and i saw where the energy suspension kit does not replace the sperical bushings/bearings and that...
ok well i was installing my main bearings today and was a lil confused with this so i contacted my friend whitezombie and he aid he has never come across this and just wanted to see if anyone has seen this.
but i was install the bearings today and on the number 3 main where it has 2 oil hole...
ok well i was installing my main bearings today and was a lil confused with this so i contacted my friend whitezombie and he aid he has never come across this and just wanted to see if anyone has seen this.
but i was install the bearings today and on the number 3 main where it has 2 oil hole...
ok im swaping a 7mgte from and 87 to my 88 n/a but a few of the plugs are broken and missing and some of the harness looking like it has been cut into. does anyone have or kno where i could find a diaghram that describes what each plug goes to so that i can rebuild my harness any help will be...
im lowered on H&R springs his about 1.6 in front and 1.3 in the rear and really want some mkiv tt wheels but i was afraid they may rub. what size tire would i probly have to run in the front and back to maybe prevent it from rubbing.
http://www.vadriven.com/forums/showthread.php?t=404772
---------- Post added at 11:28 PM ---------- Previous post was at 11:25 PM ----------
i just dont really like the yellow letters
im interested in buying a 1887 turbo but after talking to the guy he said that something with the alarm system is causing the car to not crank. is there a way that the alarm can be disabled or disconnected to try and start the car
before anyone says it i have searched and have read and studyed many threads on 7mgte rebuilds. but i was wondering if there was a thread that covered every aspect of this motor such as from measuremnts to small details to installing parts etc. planning on buying a gte soon and rebulding...
im thinking soon im going to pull out my engine and freshin it up and do a rebuild on it i have found a few kits on ebay and have heard to just throw away the headgasket and get an oem im just wondering what kits yall have you and had sucess with. i have posted a few to see what yall think and...
has anyone painted there car with this color trying todecide if i should go with a kandy or stock 3h1 paint
http://carphotos.cardomain.com/ride_images/1/2643/801/6605400195_large.jpg
theres a guy that works at a shop and he has 4 mk3 supras. i believe 3 are turboed and one n/a they have all been wrecked two hit on passenger rear but motor and interior in good shape. one has been hit in front could be fixed i think but one had been on fire which was heavily moded. has wilwood...
i need a new cat since its about 20 years old and the flanges are warped. i have a 2.5 inch exhaust and an obx header so the cat is holding me back. i thinking about just getting a universial cat and buy flanges and weld them. but what size inlet and out let cat should i get and what size...
i need a new cat since its about 20 years old and the flanges are warped. i have a 2.5 inch exhaust and an obx header so the cat is holding me back. i thinking about just getting a universial cat and buy flanges and weld them. but what size inlet and out let cat should i get and what size...
Has anyone painted there sawblades. my car is burgandy and im thinking about painting them a gun metal or gloss black. just want them to look nice till im able to get some new wheels. if anyone has any pics post them up
i Have been doing alot of research on the forum and i have become to like the TT wheels alot. so im trying to see what everyone thinks i should do either get some polished or non polished TT wheels or try and find some aftermarket wheels such as fnorc-1. any suggestions would be great. i am...
im trying to see if anyone would be interested in coming to VIR this week november 12th this friday. ive been up there a few times for this event and had a blast. but i was always the only supra. let me know if any of yall would like to come and ill try and findout more information.
well next...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.