Wheel Fitment & Question Thread

BorHor

2JZ-GZE
Jan 10, 2006
6,181
1
0
35
San Jose, CA
They might stick out depending on what size tire you want to run. And if you want ADR I can get you some PM me for pricing.
 

Wiisass

Supramania Contributor
JByrd43;1068801 said:
http://cgi.ebay.com/ebaymotors/_Car...hash=item270252220606&_trksid=p3756.m14.l1318

They say they will on the page but i dont see the this size and offset listed here, need help

It's simple math. You add or subtract and look at the pictures of wheels with similar fitment and then you get an idea of how they will fit. Like an 9.5+25 will sit in 13mm further than a 9.5+12 which is about 1/2". So you look at a picture of a car with whatever size wheels you can find and look at the tire and think about if that's how you want the wheels to fit.
 

FredMk3

mk3 for life!
Mar 30, 2005
71
0
0
Sept-Iles/Quebec
www.cardomain.com
Here's some pics of my new wheels, have them on for about a month, no rubbing at all. lol of course I'm on stock suspension...and yeah I know I need a drop...it's in the works!!! :) I'll have more pics shortly...in another thread somewhere, someday lol.

Wheels are Enkei RPF1 17 X 9" +35 all around with 255/40 front and 275/40 Yokohama S-drive tires. Sits pretty flush to the fender and I could go 265 F and 285 R on those same wheels, maybe later down the road.
 

Attachments

  • supra1.jpg
    supra1.jpg
    409.8 KB · Views: 55
  • supra2.jpg
    supra2.jpg
    293.9 KB · Views: 58
  • supra3.jpg
    supra3.jpg
    364.3 KB · Views: 58

87witmoreboost

Officially HKS'd
Aug 27, 2007
323
0
0
36
New Hampshire
17x8 +25 all around on RS*R Race springs. No rub, great fitment.

DSC04469.JPG


DSC04529.JPG
 

Quarky

New Member
Apr 21, 2008
10
0
0
Up North
p1077803_1.jpg

p1077803_2.jpg



5Zigen FN01RC

17x9 +15 235/45/17 front
17x10 +25 255/40/17 rear

Might try out some 17x10 +12 in the rear later on, and swap the 17x10 +25 to the front.

Thanks BorHor for your advice!
 
Last edited:

Jackson

New Member
Jun 2, 2008
14
0
0
Grand Blanc MICHIGAN
Hey I gust bought a set of 18 inch Axis x 7.5, offset 40, I need your help I wont to purchase the best fit for the tires, can someone please tell me the best size and brand of tires to purchase to give me the best look, I have a 1989 7ME, I would like to make the purchase by this weekend if possible.
Thanks for all your help.
 

Jaychen

New Member
Jun 29, 2008
140
0
0
Brisbane
hey guys, does anyone know what rims JDMKIII_87??? is repping. I have a TurboA also and they look tidy, if anyone could help me out at all that would be great.
 

rodel

SoCal
May 19, 2005
2,266
5
38
SoCal
Jaychen;1078888 said:
hey guys, does anyone know what rims JDMKIII_87??? is repping. I have a TurboA also and they look tidy, if anyone could help me out at all that would be great.

These? XXR 006

sm_photo_missing.jpg
 

rodel

SoCal
May 19, 2005
2,266
5
38
SoCal
Jackson;1077857 said:
Hey I gust bought a set of 18 inch Axis x 7.5, offset 40, I need your help I wont to purchase the best fit for the tires, can someone please tell me the best size and brand of tires to purchase to give me the best look, I have a 1989 7ME, I would like to make the purchase by this weekend if possible.
Thanks for all your help.


235/40s. Lots of brands to choose from. Check websites such as tirerack.com, discounttire.com, etc...
 

Mk3Soup

Proudly Sponsored By SPER
Aug 20, 2005
38
0
0
Queensland, Australia
two different sets. unsure on the offsets of either as both were purchased 2nd hand.

First set- Veilside Andrew V's 18x9 and 18x11.5 (235/35 n 265/35)
l_db1402933efb270c715f106482c7bddc.jpg

l_85aa9036f313350c8693c92c0b975bc1.jpg

l_12c88aca80d7ed43e7d1db244d8b5ec6.jpg


didnt get a chance to drive on them cause my car was still being built at that stage n a mate borrowed them n completly curbed them on a square gutter. ill find out the offsets when i go to the shop next. have no doubt the rears would of scrubbed (hense the 4wd ride height) but was planning on widebody to fit them.

Dont know who makes the 2nd set but they were free n dont have the offsets on the rims but they are 20x8 all round 225/30, with no scrubbing what so ever. planning on going to either a 245/30 or 225/35 after the next burnout comp.

l_d491944ef104713cf21fd54a27d86a69.jpg

l_d6fd4c6f4d1f02f764b3707faa0b74bc.jpg

l_72d844a41ac6821bda5672ff05ab9402.jpg
 

87witmoreboost

Officially HKS'd
Aug 27, 2007
323
0
0
36
New Hampshire
I suppose it's time I post. Not sure how it becomes a link on the first page - Boris, do your thing.

OEM Ford Mustang Cobra Wheels - 17x8 +25 all around. 245/40-17 Front, 255/40-17 Rear

No fender roll - no rub. (Just bent the fender-well tab up to the edge of the fender lip)

sm_photo_missing.jpg


p1083921_1.jpg


p1083921_2.jpg


p1083921_3.jpg


p1083921_4.jpg


p1083921_5.jpg


On RS*R Race Springs and Illumina II's
 
Last edited:

BorHor

2JZ-GZE
Jan 10, 2006
6,181
1
0
35
San Jose, CA
Jackson;1083805 said:
I HAVE 18X7.5 WHAT DO YOU THINK THE BEST FIT WOULD BE FRONT AND BACK i LIKE TO GO AS WIDE AS i CAN BACK.
Tire size?? I say 225/40/18


And yeah I need to update that front page.. I'll get to it some time next week.
 
Last edited: