Cars ready for paint, any recommendations on paint codes? I'm set on painting black, but not sure which black to use. Painter friend recommended Honda b92p nighthawk black, which is a blue pearl, but I'm not so sure about that. Not sure about the Toyota black either because I've heard they...
I just started experiencing this today. When key is turned off, everything shuts off (cluster, stereo, temp + pressure gauges) except the engine and MAFT PRO Has anybody experienced this before? I looked up the wiring diagram for the circuit in the TCCS, and I plan on starting by testing the...
My fuel dampener is currently leaking from the top where it looks like it has been crimped against itself (metal on metal) from Toyota. I bought 2 more off of SM, but I found that these two leaked from the top as well. I have a third one on the way that should be here soon, and then I will...
I'm trying to use the timing light to adjust my CPS to the proper position. I have double checked to make sure everything to this point is correct. I turn on my car, and jumper E1 and Te1 to adjust timing to the correct mark; however, the diagnostic box when jumpered is not retarding my timing...
I read the above sticky, getting ready to break in the 7m. I bought super tech universal motor oil SAE 30 from Walmart. Says designed for use where sae 30 API CF-2, CF or SJ oil is recommended. Is this correct for initial break-in? Thanks in advance
I searched and sifted through many threads, but I couldn't find the answer to my issue. Power steering is weak at low RPM's, it turns fine once I start moving. How do you know which power steering component is failing? Trial and error? I noticed many threads said that the rack needed to be...
Does anybody know the name/or part number for the large o ring for the oil filter? Finishing up my build, can't find it. Guess I'm going to order it from Toyota because local autoparts store doesnt carry it. Tia
I just wanted to verify that rounding down to a HG size will not cause any problems. My block measured out to 198.35, which is .15mm off stock after machining. The head was 115.25 or .75mm off stock. I need a 2.27mm HG. Cometic HG's do not come in that exact size, but after searching I saw...
Hello all,
I'm looking for an accurate compression ratio calculator for our engines. Going to be going with a cometic hg, probe pistons, and eagle rods. Not sure about what bore is needed yet, but everythings at the machine shop now so I'm looking for the calculator. I searched this forum...
Hello everybody. When I first got the car I went back and re-torqued the head. Didn't have a torque wrench, so I just tightened without it...but this was before I had done any serious modifications. I recently blew my headgasket (no major blow, just barely), and I have decided to go ahead and...
I am currently in the market for a turbo. I have the stock CT26, and am considering CT26 with 57 and 60 trim. Why does the 60 trim have a reputation for being unreliable? I am also very interested in bolt on turbos, but I can't seem to find much information on them. My friend had a 57 and...
I have an 89. My car doesn't stall at all with a BOV and I'm not running standalone/MAFTPRO. I have the basic mods: 550's, Lexus housing, IC + Piping, Mishimoto, HKS bov, ect. Why am I not stalling out? I know others who couldn't blow off to the atmosphere without stalling out until they...
Just installed driftmotion's 7m ic kit and found that the piping runs right over the turbo. Is that ok...? Do I need to heat wrap/ find a heat shield (still got ct26)? Would that help enough
I am looking for someones opinion or knowledge from experience on brakes glazing over and not stopping the car!
I had bought a set of front and rear drilled and slotted rotors off ebay.... Probably my first mistake
When i drive hard and fast and break hard a couple of times then Glaze! and...
I wired up 3 Prosport gauges recently and they are working except I could not get the orange wire (used to switch the colors to blue when headlights engage) for the gauges to work on the fuses. So I took out my ashtray and pressed the end of the orange wire into the back of the ashtray courtesy...
Hello,
I am a newer supra owner. Sorry in advance if some of this has been answered, I've searched but haven't found all my answers (please point in the right direction if you can). I have some fade in the clear coat on the hood and the rear bumper and spoiler. Also, I have some dents in the...
Hello. I have a 89' 7MGTE that will no longer start and reads code 52. I have used the search function, and I think I've found all of the information I need to go through the rewiring process for the knock sensors. However, I still have a couple questions. If these have been answered before...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.