Search results

Has anybody ever made an engine cover for the mkiii by using an undercover from another car? Just curious of what other owners have used or is there someone who make them? I tried looking up undercover for the mkiii with just old posts from 15 years ago.

Was suggested I use adjustable cam sprockets with my 264 Tomei pon cams to get the best performance out of my cams. Bought some Tomei cam sprokets and the instructions sez if you have pon cams the valve timing is already preset to factory specs. Unless I have a bigger block, bigger HG or did...

I turned the boost down to 15. AFMs are 11.8, but she shuts off everytime I come to a stop. Power feels more at 15 than my normal 18 psi's. I let it idle gasing up today, got soot on some poor guys BMW behind me when I took off.

Yeah, thats what I did. Tomei calls for .020 intake .030 ex. I had only one intake that took 0.15 but was real tight on .020. started it up. No smoke from my first valve steam seal r and r no valves dropped too.�� She was idleing at 1100 bc of my standalone, shes at 800...

I got the cams in today, took 3 weeks on ebay. Instructions are in Japanese but sez in English not to install the cams in the same order as OEM. Anybody ever install any? As for the shims, it wants 20mm intake 30mm exahust max. I think i can do the shim part needed, just need the torque...

Hey Supramania, need some help on installing the 264 Tomei pon cams for the aristo 2jzgte. I just installed valve stem seals and want to get better cams since the valve covers and cams are off. Do i need to reshim my buckets? If so is there a how to, im unsure of the clearences on the pon...

Are you talking about the hole with the filter? Where ppl usually put thier aftermarket map sensor at? Mine has a freeze plug looking thing on the back side of the intake near the brake booster, like the ones on cyl blocks, but the size of a dime. Was wondering if theres threads behind it.

Yes, whatever it had to increase the vaccum. They said it supposed to have a bolt ontop. I dont see one though. Driftmotion said I may have to tap and put a dash 6 fitting.

Real small metal hose on the intake manifold. Not like the 7m ones. Like half of -6. I think it had a device that help boost the pressure.

Need some help fellas, was wondering what you guys use to make the aristo pipe for the brake booster on the intake manifold bigger? Do I have to tap and put a barb hose in? I tried to find a link to anything, but only came up with 1jz stuff. Taking my intake off to replace the gasket and was...

Hey I need some help on determining how much my ic can hold. Right now I have an 25.5 long (not core size) 7 inch core top to bottom, 3.5 width. How much power can an IC like that be efficent for? My goal is around 500 on pump gas.

I gave up on that motor years ago. Never looked back either.

What is considered bad?? Mine is starting to wobble, but its only missing a half an inch of that dampning rubber stuff. Can they be welded?? Is the one Titan sells the exact same size and wieght...

if its as quit as the US spec Sw20 one, must be a good find..

I need to know what Speed Cut from Greddy I need for my 91 2jzgte from an auto aristo. Im using an R 154 right now. Please help!!!

So basically, this is a stock cpu with just a higher rev limiter, fuel cut, SS cut and Fuel Cut i suppose?? It sez modified map for 440s, So the benifit is I would save money by getting this cpu would I really need a neo too?? All I want is 18 pounds on a single 61 trimm with 550s.

Ok, I read that like before I posted...what does STILL set up for 440 injects mean, its only for 440 injectors??? Is this thing good for 550 injectors? are these things adjustable?? Something along the lines of fuel cut, boost cut speed cut eliminated doesnt tell me about the map. Ill just call...

http://cgi.ebay.com/ebaymotors/Toyota-Supra-Aristo-JZA80-JZS147-Blitz-Access-ECU-RARE_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem2ea75a5168QQitemZ200376209768QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories I tried to contact with no success, but if i run across another or buy this...

Yeah, thanks for your support and chimin in. You figure spending soo much on these things it should fit. I spent almost all day working on that steering wheel, I just cut and soildered and drilled three holes in the rear with the help of goop and it worked great!!! Telescope has no probs, no...

Just got mine today and it dosent fit all the way. Does anybody have one here for the MKIII Supra?? Mine is a 88, and the hub dosent sit all the way down and make any connections at all. The horn dosen work and signal does not retract. Is this hub supposed to be plug and play perfect?? I would...