Search results

You stripped the bolts to mount it or the bolt for the fuel line?

Did you have the block checked for cracks? Pull a plug and see if the pistons are wet. Got any pics of the engine bay?

Zankouku sells kits also.

Theres dowards cobra bbk. Best bang for the buck imo.

Did you get the license plate number? Taxi company? Call the taxi company? Might be sol unless you can find the car.

Yup same. Edit: You can also look in the epc some of the time for things like this. http://www.cygnusx1.net/Supra/Library/EPC/291420/part.aspx?S=52159

Dont take things off if you dont know what they do. You prolly have a boost leak somewhere. Check all your ic pipes and make sure the lower hose at the turbo doesnt have a crack in it. Check all the plastic ic pipes for cracks around the seems. You could also make a boost leak tester to...

I have red stuff in the back and had them in the front. There nice pads. I also like the trd carbon ceramic pads and have gone through about 3 sets in front and 1 in back since i got them for free. If you go to the track make sure you got some new rotors, pads, and fluid so your braking...

My buddy had 31(i think) one time when we were cruising around and it wouldnt rev. We swapped like 3 afms and same shit. Finally put his back in and tapped on it a little and has been good ever since. Didnt have a mm so we didnt check it. Afms are tricky little things. Btw you can just pull...

They look nice. Will know how they work hopefully this weekend.

Mods and how hard did you run it with 87?

Your supra owner friend is a tard. You need boost reference.

The kit dm sells is pretty decent for the most part. Some of the gaskets are ok and others are great.

lol. Well at least hes got dinner.

Sounds like its in the wiring some where.

http://www.spracingonline.com/store/SP_61GT_87-92_Supra_Direct_Bolt-On_/3143

Both sunroof turbo 5 speed damnnnn. You cant just rebuild your engine?

That would be nice but thats not how things work. You dont go to toyota and buy a new hg expecting it to come with intake gaskets.(not the kit) Would be wise to replace them as that really is a pain in the ass to replace. Fipg = form in place gasket so yes silicone.

If its metal it could be and could be resealed with a tad of fipg. A tad as you dont want to fill the feed hole with fipg. Dm 57 trims do not come with the gaskets.

Theirs no advantages of disconnecting the csi.