Search results

Fixed. ;)

I would mount it in the fender to clean up the engine bay and the charcoal canister does its job better away from heat.

People are making over 600hp on the 2jzge. You can put a 1jz head on it with a thicker hg to lower compression and make a 1.5jz. The blocks and heads are different between 2jzge and gte. If its going to stay n/a and is for your wife i would just do a 2jzge with a w58 as the ge wont break the...

B2 white plug on 89+ gray plug harness. Its a 23 pin connector and the 1 i have only has 8 wires on it. 1. Airbag signal check connector-----Brown and does not get used as there is no air bag on pre cars. 2. Oil level light signal (mostly European cars only!).----- yellow - again not used...

B1 yellow plug White connector 1. Heater Water VSV------------------------------------------------ Black \ Yellow 2. L3 to ECU used for AUTO, not used------------------------------------- Red \ White 3. L2 to ECU used for AUTO, not...

Ok some thing is a little strange. Edit: This are the 4 connectors you should have ended up with. The gray plug is a b3 connector yellow - for abs black - for abs red/black- for abs White/green - is for pps which early models dont ahve so that one doesnt get used. white/red - same as above...

Next time cut the jiggle valve off so all the air can get out quicker.

Im not crying im just so happy.

Now thats a sweet deal lol.

Does not seem normal to me. Your bad luck got worse and worse. Either karma is getting back at you or you have a fat stream of good luck coming your way.

Who said said it was about anything?

Id give you 350 for the mess.

If the targas off you could just lean forward lol.

Sure it will just gotta lean back and hit your head on the window. lol.

Yup they go on top of the sliding things and not slide in with them. NP.

Im 5'7 and i fit just fine. Rode in the back for the first time a couple days ago. Also for how small it is i've even fit 4 people in the back. But i do not recommend not only cause there's not enough seat belts but with all the complaining your going to hear it might give you a headache.

For the m1 plug they should be all the same color wires iirc. To depin if you look down at the pins on the connector you will see a little tab, If you use a pick and pry the little tab to the side and pull on the wire it will come out. Even if you get the pins out its no use on the newer...

Driftmotion.com and double, triple, and quad check things. Prolly not much of a answer as there are too many threads about this topic already. Just rebuild for your power goals and make sure its right. As long as the bearings didnt disappear and rods start riding on the crack should be a...

The thing i see wrong with swapping shims is there made by different companies and might have some differences. If you want to experiment go for it.

I should have taken some pics when i did it. Ok. I see 4 connectors 3 white and 1 gray. Im guessing the top one is for the abs ecu? Can you take some pics of the wires on the remaining connectors?