Search results

Low impedance top feed is what your looking for.

Ya. Same thread pitch means they will go in fine. Only problem with the 7m is that they like to strip. Might be wise to get some helicoils and make some new threads for them if the manifold is already off.

Hint: the 4 in 4x114.3 means 4 lug. Unless your supra magically only has 4 studs no they wont fit. Can get 9.5 or 7.5 in 18 with the silver. Personally if your set on those wheels id just get 9.5 all around. 9/10 stagger or 10.5/9.5 stagger is better fitment. Esp with a offset of like +20-30.

Ya i did just not today. If using the 7m starter is prolly fine as there pretty beefy.

Damn thats light. Might have something to do with no targa and non stock seats tho.

Corvette. Its an all around better car. Viper cant handle for shit and barely gets traction esp when modded. Plus the ls engine is amazing and sounds mean. Corvette track cars own.

You will have to start calling all the shops around you to see if they can fill a r12 a/c system. You can still get it just have to look. Price idk depends on what the shop charges.

I used the 3mm blue component LED's from superbrightleds.com and they are not too bright at all. Actually wish they were brighter. So if you look at the specs on them if there around the number for those then they shouldn't be too bright.

It would be stupid without a i6 turbo tho. Even tho this was posted 3 years ago. none of those cars have 91-92 5 spokes so they couldnt be 91-92 specs. Also says 89 in the text.

No it says about 17. The estimated mpg for our cars is 17 streets 25 hwy.

Usually for compression you want about 140psi min and up to about 180 sometimes hgiher depending on compression ratio. But if you have more than like a 15-20 psi difference between cylinders there is a problem. If your shooting out water hg is prolly super blown. You will prolly see a...

Maybe if it just kept spinning and spinning. But youd most likely have some sort of engine problem if you boosted 30+psi or something. Have a friend with a 1jz and 2jz twins. His wastegate hose came off and it blew out the rings on no6 nad possibly 5. What turbo and bov are you running.

Those are some cool pictures.

Then...

I wouldnt be near the house that is frying turkeys inside.

Id put a clamp or something on the waste gate. That prolly wouldnt end well if that fell off and the wastegate never opened in boost.

There is a way to make it all nice and pretty. Could also just use a smaller hose than deleting it. Smaller hose might make it fit in there easier.

What about under the drivers head light? Could ask beech performance to make you one in the size you need. Im sure he would. His section in in the vendor section on here.

Yes but the extension housing on the trans is different.

Damn. Sounds sick.