Search results

  1. I

    Reinforcing the rear toe arm...thoughts?

    I'd use at least 2mm maybe even 3mm. The stock tubes are quite heavy wall so you want close to that thickness.
  2. I

    Reinforcing the rear toe arm...thoughts?

    I was thinking more a pair of flat plates with holes cut in them so they're welded 360 degrees around the eye extending forward either side of the tube for 150mm so the form a H beam with the tube as the cross beam of the H.
  3. I

    T61 Bolt on Turbo by Cx Racing

    I seal mine with some Copper RTV Gordon.
  4. I

    Thanking you from Down Under.

    Very welcome! (I was in Dandenong this morning ;) )
  5. I

    Notorious M.K.3.

    That's the one :D so tough looking thanks for posting that pic it's a new angle!
  6. I

    Notorious M.K.3.

    Let me preface this by saying normally I'm not into Mk3 body mods at all in any way shape or form, BUT for this car it's so well done I can put aside my bias :D I esp :love: it when it has the Black wheels installed!
  7. I

    Upper radiator hose. Hard/Silicone

    What is the head made out of?? ;)
  8. I

    This is why you should change your Fuel Filter

    I replace them in any car I buy I figure it's cheap insurance and not worth the risk of losing an engine over $20 and some frustration fitting the new one.
  9. I

    Project: Holy Grail

    They're such a pretty car :D
  10. I

    So I was thinking...

    Yo Dunck how's things?
  11. I

    HPF- Building a 1000rwhp e46 M3

    Will watch these later :)
  12. I

    hydraulic throwout conversion?

    Would have to convert to a Push style PP at the same time.
  13. I

    Steering wheel Boss with cruise control

    3 buttons on this one so NFI and yep I'm not going to reuse it
  14. I

    Steering wheel Boss with cruise control

    I have one here Kris
  15. I

    take your guesses

    Not all 7M's have it some just have a pipe plug there, it's 9 parts useless as you can't get to it and it's not low enough to fully drain the block.
  16. I

    take your guesses

    You should listen to people that are smarter ;)
  17. I

    take your guesses

    #1 Block coolant drain.
  18. I

    My stealth charcoal canister install *PICS*

    <nodding>
  19. I

    My stealth charcoal canister install *PICS*

    The Purge would just suck in raw fuel..... I really don't understand this "need" to remove the CC at all, just buy a smaller one that has an inbuilt one way valve (easy to check at the junkyard just blow into the pruge line if you can't it's good to go) Then mount it under the plastic...
  20. I

    My stealth charcoal canister install *PICS*

    Stock setup uses a BSV on the water neck to control purge, there's a valve in the tank and the fuel cap has a one way valve so it can only inhale.
Top Bottom