Search results

Best bet would be to run a all new harness from DIY. Make you own and use all the factory sensors. Ms3 pro is out now as well. Same features as ms3x but in a smaller water proof box with water proof connectors. Can make a patch harness or run a new harness. I will be using that on my 91.

Ms3x will allow full sequential for fuel and ignition if you wire it up tho. Much better.

Check the power and grounds for the Ecu.

your supposed to or bypass it.

You can buy mine. Im in socal tho.

Did you just make a custom bracket for the calipers?

They don't just slide into place. Have to move it up and down and push in. Can hit that bushing on the left out more and it will prolly be easier.

No there isn't. It's pretty straight forward. Just look for the bolts attaching it and remove them and it slides off.

pull the fuel fuse and main relay and other things if its not driven so it cant start.

Undivided manifold. Can't use divided with qsv.

Looks like the abs plug for the rear sensor on trans.

Get a quick spool valve. It can increase spool time by like 500 rpm or so. Non divided manifold and divided turbo.

Sp racing f1 manifold and use a s360 with a quick spool valve. That will be my setup soon tho i prolly wont run the qsv. .91 divided housing and divided manifold. Youtube that and there is a black mk3 with 1jz. Sounds like a f1 car. Incredible. Are you running divided or open currently...

Never heard one of there resonators. But there piping is nice as well. Don't want something to thick and heavy.

Burnsstainless.com There mufflers can be quite loud depending on which one. Tho sound excellent.

Could be the top seal, abs sensor oring , speedo o ring. Reverse washer. Or the case.

Jdm 2jz uses the same buckets and shims as usdm. But sizes of the shims are different for every motor. In that link I posted, if you measure the shim with bucket you will get the total size needed for shimless and it has the pn next to it so you can order from champion toyota or the like.

http://www.supraforums.com/forum/showthread.php?168759-Questions-about-shimless-buckets& Can't just throw buckets and shims in. Has to be measured with the head and cams you have. It's about 300$ for the shimless buckets.

Welcome. And it's just gte. Not gtte.

I run 6qts redline 5/30. Redline mt90 Stock coolant capacity is 1gal coolant 1 gal distilled water. So you will prolly need more. Little more water won't hurt. Ps system depending on what your doing for a cooler. Qt maybe a little more.