Search results

The retrofitsource has quality parts. Just need h4 6/7 housing and the morimoto mini projectors fit inside.

275/35 on 18/10 +25 -1.7 degree camber fit fine for me.

It might fit. Rears will be close tires wise. Tho it's basically going to make getting traction useless.

When you open the door headlights fog lights go off auto off? Both head lights come on using only 1 headlights plug? http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=060 For high beams indicator to come on head lights have to be on and then high beams to be on with the...

If it's what I think they are I believe he wants like 1000-1200.

Sounds like it's in the wiring.

No just remove it.

I would just use a hard line. Either stock or the azp one. Hard line will out live the Teflon one any day.

I would use stock or the arp hard line. There is no gain to be had by using a rubber hose covered in stainless braid. Alot of people have used them and ive seen a few break over the years. Up to you when you want to replace it and with what.

Im not sure what was used. But good paint is expensive.

For a quality show paint with prep I wouldn't pay less than 4k. My 91 had a 6k paint job done including all door jambs and engine bay in glacier mica frost and got the body straight and the right rear quarter panel replaced. Maaco is cheap. Some of there painters can be good. You could...

Patch hanress could easily have pins added and same with the stock. Or you can put a flying lead on it. It's not hard and wouldn't take long. Gas mileage will be better with sequential of course but it's not by a huge amount.

Doesn't need a full rewire. Just 3 wires need to be added.

Which engine? 7m I'm guessing. The diy pnp is ms2. Can only do 4 seq ignition and with an upgrade can only do semi seq for fuel. For 7m that would work.

Well atleast one of your cars is shiney.

Dang Corbin. Your ballin.

I think even a shorter hose might have worked better. Can find -10 an fittings in like 15 30 45 degree angles.

WASTEGATE bypasses air away from the turbo to control the amount of boost. Exhaust leak is a noisy smelly hole in your exhaust system. Wastegate only has exhaust gases moving through it when you reach full boost. Other wise the gate is closed and nothing comes out.

Slightly off topic but i dont suppose mouser would have all the interior connectors and pins?

I found the part numbers as well. But if it didn't come to te states no shop is going to have it. ESP since it's a 1g. Prolly worse to own a 1g than a rb.