Search results

got my first one about 6 months ago that came with a free BHG and rod knock. So I went with a 1jz off the bat!!:biglaugh:

yah man, just re-use the oem gasket!

I just don't see how it will blow out my valve seals if I am running a 1" piece of hose to the catch can with a vent. That will move more than enough volume of gas to relieve the pressure in the case. I understand running a little breather filter is a bad idea because it gets instantly clogged...

I have had mine hooked up with the catch can vented for a while now. I have also ran it this way on my other cars too. Is their a problem with running it open without a vacuum source? I figure as long as the pressure can escape out of the case it won't push oil through the valve seals.

it has already passed. It is now 75' and newer get smogged no matter what, except if your car is less than 5 years old. They are trying to pass a new one in california to where all 95' and older get smogged every year instead of every 2 years.

I noticed the same problem with the Royal Purple synthetic when I fist put it into my tranny. The shifts got notchy and slight grinding. I switched over to Pennzoil 80-90 and it shift beautiful now.

I know the legalities of the engine, but engine aside, I mean just because you have an exhaust, intake, ect....

My Boss at work was looking at my supra and was telling me that if I got pulled over and they looked at my engine then they could impound the car because it is not stock. I think he is full of it, but I don't know. I know they can give you a ticket, but I didn't know that they can impound the...

you should run the Stinger standalone from Driftmotion.com

you are going to be pulling out a lot of fuel with those injectors and an AFC, especially at WOT. Your timing is going to be way out of range.

yah, something must be wrong. I made 272 to the wheels at about 11psi on my Driftmotion Ct26 57trim kit.

:biglaugh: :biglaugh: :biglaugh: :biglaugh: :biglaugh:

Dude, You are insane if you will use that kind of filter again:aigo: Why not just use a Toyota filter and not have to worry about it exploding in half?

nice rainbow colored TEMS cover. Is that JDM:biglaugh:

Just pressure test your cooling system and that is the best way to rule out the chance of a blown head gasket. It should hold pressure, what ever the cap is rated at 15-20psi and if the pressure drops then pull out your spark plugs and look into the cylinders and you will see that they are wet...

Good deal man:bigthumb:

I just recently got the Tanabe Hyper medalion from Driftmotion and it is my favorite exhaust I have ever had. Super nice quality, and nice and mellow when cruising and sounds bitchin' at WOT. For the price, It is awesome!! It allows me to not run a cat and not draw attention when cruising unlike...

I routed my harness in a similar way. Aaron helped me out and showed me the sweet spot and it worked great. No extending the harness at all.:naughty:

damn, that motor looks brand new!! Nice:naughty:

back the screw out if it is surging badly because you have it too tight . Back it off as much as you can too where it will still hold the boost you want. are you sure that you have the vac. line connected right?