Search results

The Supra has never been dynoed but the C5 was dynoed at 605 hp to the wheels http://www.youtube.com/watch?v=8rf2WmY3r3o&feature=c4-overview&list=UUu23wmw-y1eOz6i_nj5Rwrg

Hi Everyone its been awhile but Im in the need of a new suspension Im on konis and eibach springs its far from ideal a few years back there was a thread about how to make your supra stick I Think thats what it was called any ways it consisted of a gixxer drew suspension set up utilizing bilstein...

Ok so not really a race between the two since the mk3 would walk over the 180sx but a discussion on both cars and their merits. Last fall I came upon a 1991 180sx with a blown motor and 93k on the chassis for a price I could not refuse I picked up an sr20det for 1k and put about 700 in mods and...

Heres a few vids from a few weeks ago enjoy http://s2.photobucket.com/albums/y29/lintlars/Redsupra/?action=view&current=1251.mp4 <object width="1280" height="745"><param name="movie" value="http://www.youtube.com/v/J4GBUAR8gYY?fs=1&amp;hl=en_US&amp;hd=1"></param><param...

back ground info: Car was running great 11s on the wideband under WOT 16 PSI (60 trim) EGTs under WOT in all gears never got past 1450 and I had it running on the rich side where it would go down under WOT and hold steady at 1400 timing set at 8 deg diagnostic block jumpered fuel pressure...

I just bought a 1993 Toyota t-100 is there any way to find out what maintance has been done to it since its has seen mostly Toyota for service? It just mainly curiosity since it runs and drives great but the mileage is quite high almost 400k also anyone know if there box or panel replacements...

I picked up a Supra in parts my current Supra does not have this part the one I picked up does heres a pic Im thinking its for the headlight washers but where is the plug located in the engine bay? Thanks

I have a 89+ Supra and went with the MK4 turbo mounts from doing some searching on here just have to cut off the Aluminium nipple on the bottom my concern is they are .5" longer than the factory mounts has anyone had any clearance issues with these? Such as the Downpipe, Intercooler piping? Thanks

What are my options when it comes to Valve guides? I need a new set for the head at the machine shop Ive seen whats on ebay but cant find much else anyone ever redone the guides?? also the machine shop trys to avoid doing the guides and would rather put in over size valves and machine the guides...

Ok I was curious on the quality of the XS copy and decided to do a direct comparison of each since I already had the Aeromotive FPR, I purchased the XS version I have not tested it since the ground is cover in snow but I thought the community would like to see pics of each unit side by...

Ok Im trying to find a Tach signal Ive tried two from the ECU Ive tried both RPM1&2 from the SAFC diagram they do not provide the signal that I require the only signal Ive found that works for me is the IG plug from the diagnostic block in the engine bay I do not want to run a wire from that to...

Im looking to buy a Walbro 255 pump and stumbled across this site http://www.treperformance.com/FuelPumps/ has anyone heard of them or used there products?

Ok I was going to get my head rebuilt by heads unlimited in Surrey but another member had problems with them any other places anyone can recommend I want to get a head rebuilt with oversize valves and the shims set. Thanks

Does anyone know where I can find dimensions for the rear subframe? Mine might be bent as one side of the car sits lower than the other its not the suspension I found the body dimensions in the TSRM but cannot locate the rear subframe specs. Thanks

Ok ive been running these pistons for about 6 years first on a upgraded ct now the last summer it was on a gt35r w 680 injectors the amazing thing is all pistons had major damage but a leak down test came out good less than 4%for all cylinders except #3 and the HG remained in place (cometic)...

Heres a vid from this past summer its also in my build thread along with the links to my other vids

Ok Ive been putting this together for the past few months Im finally ready to show the progress heres the specs Motor-7mgte with Je internals fully rebuilt Turbo-Garrett gt35r with a .68 ar Injectors- Precision 680cc Drivetrain-Stock FW Feramic 6 puck with an ACT PP Aluminum Drive shaft...

Ok heres what happened I was at the track for the first time with my new set up I was doing my first burn out when I was done I pushed the cluch in to stop but it did not work I was stuck in gear I had to stall the car to get it out of gear and get towed to the pits I took the inspection plate...

Now I have your attention Im in need of a -11 spring for a 50mm Tial BOV I just got my car on the road a few days ago and Im getting major compressor surge on my new gt35 does anyone have one?? or know of where I can get one?? Im starting my week long road trip today starting in Edmonton for 2...

Im in need of a -11 psi spring for a tial 50 mm BOV im getting major compressor surge right now and Im about to go on a 2week long road trip does anyone know of a place I can get on in Edmonton or Calgary? Thanks any help would be appreciated!!