Search results

So I got a ticket a while back for a speed I wasn't even capable in my beater a '99 single cam saturn and lost. Now heres the thing postponed the ticket once came for consult on the forums and hired Peter Humblias, great guy by the way. We went to court THREE times no officer on top of I got...

Hey everyone so I reshimmed my 4.30's a while ago and had a blast but after a while of fun and drifting I kept getting a bad clunk and felt like a dead axle so I cracked her open and the casing was ripped off on the gear side

So I been looking around like a mad man seen them on forums and projects but never mention how. I am looking to get turbo exhaust housing flanges to do a custom setupbut noone seems to carry them,do I call up machine shops or a trip to home depot?

I searched around and just found threads on replacement, but can I just remove the subframe bushings? I don't want to do away with them completely I just want to raise the subframe to get a better angle for the LCA and steering rack. I threw a ruler under there Its close to an inch. I know this...

:1zhelp: Well I went out and got some new tires (still waiting on one) and got an alignment. I got to sit and watch the guy do the alignment everything in the rear was perfect. When he got to the front I went to pay the bill and he asked me to come back, now im worried, caster is way off. Camber...

well its gotten more than annoying but it happens. My tach only reads up to 5k rpm on my EMB and zeitronix they read exactly the same. I read the whole thing about using a 7MGTE tach, but if I switch the R1 resistor will it work? before I get hit with the search button answer...

Hello people plugged in my emanage and got code 49 no ignition pulse. So I pulled it off started the car CEL came on with code 31 but its because the of the emanage. I already did a continuity test all points came out good but I was unable to pull voltage from the IGF. I have no codes and the...

today I decided to do a little tuning on the old blue after finally getting some time. I did some adjustment to the AF setting and now its telling me I have no pulse signal from injectors 4,5,6. I do know that their fired in batches so its red all the time just flashing away is this normal on a...

Well I have been looking at a set of coilovers for about 2 months now and besides one sided opinions and Name brand disease I need my car to run right. I have a seen alot of input from N/A cars and I tried a eibach tokico setup Id rather have blown stockers. I am currently looking at some megan...

Well I bought a used emanage blue off my friend and installed it recently and it doesnt work I bought the support tool and everything my pc wont communicate with it am I doing something wrong? im using dl'd software from revspec.com

Well I blew my twins today, not really blown but their eating oil. I got into searching and the process of thinking can USDM steel wheels be fitted to a CT12A? I looked up the specs their preety close in all sizing so why not builds a hybrid? anyways I was looking at upgrading and rebuilding...

I Just recently did a y-pipe down pipe combo on my 1JZ and I am losing oil and smoking, but only after warm up it smokes I haven't seen any stains on the floor I'm going under and doing a compression test in a few but so far i'm suspecting the turbos valve seals or a crank relief tube but it...

Hey guys I have been having this problem since the swap and its really getting old. 86.5 1jz swapped with 440's, 2 3/4 front mount, walbaro 255 and running 11 psi new plugs at .30. After I get to about 5k bad break up and it feel like I hit rev limit which sucks. I have every part from the old...

Hello people just ordered a Y-pipe downpipe combo and I was wondering if anyone knows where I can get the gaskets for between the Y-pipe and turbo. I recently found out its not all boost that kills the turbos its defective pcv valves or blow by : ). Also big turbo efficiency jump to about 13-14...

As stated I want to see if I can just order the 2JZ turbo gaskets and seals or is there a part number i can ask for before my Y-pipe exhaust combo come

I used the search button everything was pretty vague, but anyways im probably going to buy another shell soon. As stated my future supra is going to be for my wife and I was planning on a 2JZGE/R154/4.30 LSD combo and thats what she wants. My dilemma lies in wether the 3.0 liter bottom end is...

Whats going on northeast, ye another part breaks after a new one goes in. I was driving in SI when I started hearing like a wiping wire noise and my speedometer died. after checking with the cluster off it doesn't spin, but i can freely move it by hand. Autozone and Strauss both dont carry I...

Basically looking for new stomping grounds in SI this is all I found on google maps. I do most of my own work but I stay away from jobs that are hard as hell like clutch jobs. Any info reguarding their work/tuning or other shops in the area hope to see some MK3 owners too.

Hey guys im gonna do a clutch job come some good weather what bolts do i use on the flywheel and pressure plate 2JZ or 7MGTE or a different motor altoghether

Hey guys I was looking at exhausts and wanted to know what else is out there. I am staying away from 935motorsports leaving my options to a blitz nur, tanabe touring, and HKS drager. What else is out there if its just these 3 this is what i've seen and think Tanabe touring while extremely...