Wheel Fitment & Question Thread

89gte

Regular
Apr 26, 2011
134
0
0
Tennessee
Ok, I think I'm pretty set on XXR 502 18 x 8.5 +35 front and 18x9.5 +35 rear. But I can't find any on the internet in silver that say 5x114.3...all of them are 4x114.3. I thought these wheels were universal..if they say 4x114.3 will they fit the supra?? here is a link... to what i'm looking at.

http://www.nlmotoring.com/XXR-502-Wheels-18x8-5-Silver-p/50288083.htm

and

http://cgi.ebay.com/ebaymotors/18-X...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories.

If those don't fit... does anybody know where I can find the XXR 502s in hyper silver? I'm trying to keep it somewhere around $6-700 dollars for the 4 and shipped. Thanks in advance
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
Hint: the 4 in 4x114.3 means 4 lug. Unless your supra magically only has 4 studs no they wont fit.

Can get 9.5 or 7.5 in 18 with the silver. Personally if your set on those wheels id just get 9.5 all around.

9/10 stagger or 10.5/9.5 stagger is better fitment. Esp with a offset of like +20-30.
 

scotty

New Member
Jun 30, 2009
476
0
0
Norway
scottnicholas.net
SSR MS1

18x8.5 ET?? - 225/40/18
19x10.5 ET?? - 245/40/19

262.jpg
 

wobssorc

New Member
Jul 27, 2011
25
0
0
Bundaberg
This is a great thread.. Im in aussie land and u blokes in the states have been going for decent fitment for many years.. I like it.
FYI - i run 17 x 9.5 +18 all round. Easy fit with it dumped low
 

ma70t

7mgte-s
Jun 7, 2005
141
0
0
43
va
these are bbs bugatti 17x10.5 in the rear and 17x8.5 in the front tires are 245 40 17 and 315 35 17
 

Attachments

  • P7210600.JPG
    P7210600.JPG
    75.9 KB · Views: 48
  • P7210595.JPG
    P7210595.JPG
    82.1 KB · Views: 33
  • P7210598.JPG
    P7210598.JPG
    89.7 KB · Views: 38
  • P7210594.JPG
    P7210594.JPG
    90.8 KB · Views: 26
  • P7210599.JPG
    P7210599.JPG
    84.2 KB · Views: 19

89gte

Regular
Apr 26, 2011
134
0
0
Tennessee
Appreciate it Hvyman. I figured they wouldn't, but I couldn't believe there were none available in the sizes I was looking for. I might go the 9.5 route, but I'm going to continue doing some research and consider other options.
 

WhtMa71

D0 W3RK
Apr 24, 2007
1,813
0
36
Macon, GA
So I'm thinking about a set of Rota Torque's. This is what I'm thinking and Looks like they make the 17x8 in +32(front) and 17x9.5(rear) in +30. I'm not looking to have the wheels stick out of the wheel wells and I'm also not looking for stretched tires. I know the normal offsets people run are +35 so would these stick out too much with proper sized tires? I'm thinking 245/45 fronts and 265/40 rears. Or would I just be better going with 17x9 rears and have +35 all around?