Set the crank in tonight. About .00175 clearance on all mains using the std Clevite bearings aka NDC. .003" thrust clearance. So far so good ^_^!! Yes, I know....I gotta reposition the block on the engine stand so its weight is centered better.
![izw6.jpg](http://imagizer.imageshack.us/v2/1024x768q90/577/izw6.jpg)
![xegv.jpg](http://imagizer.imageshack.us/v2/1024x768q90/545/xegv.jpg)
![7djg.jpg](http://imagizer.imageshack.us/v2/1024x768q90/823/7djg.jpg)
![ksce.jpg](http://imagizer.imageshack.us/v2/1024x768q90/845/ksce.jpg)
![pidl.jpg](http://imagizer.imageshack.us/v2/1024x768q90/811/pidl.jpg)
![c605.jpg](http://imagizer.imageshack.us/v2/1024x768q90/822/c605.jpg)
Last edited: