Furious But Lazy 7M owner who gave Up.

Grandavi

Active Member
Sep 25, 2008
2,663
5
38
Calgary, Alberta, Canada
I dont think there's any possibility for a freeze plug to cause any of those issues is there? I know I removed my block heater because (a) I dont drive in winter and (b) it is just something to eventually disintegrate and cause issues...

My only issue with the machine shop saying "usually we find...". I much prefer "we have NEVER seen that before... we have to find out what it is to make sure it NEVER happens again".
 

Quin

Trans killer
Dec 5, 2006
1,989
0
36
33
Columbus, IN
I meant that it could have been worse. Block could have had a huge gouge in the wall, head could have been effed beyond repair. What about a valve shim?
 

Turbo Habanero

New Member
Apr 28, 2009
4,229
0
0
35
Tucson,AZ
Just got home from Phoenix with my head. Hung out with Albert and Steven for a bit got some cool video's

All worth a watch. :)

[Video=youtube;qsSUN6bT24Q]http://m.youtube.com/watch?v=qsSUN6bT24Q[/video]

[Video=youtube;3h2xDbYtWec]http://m.youtube.com/watch?v=3h2xDbYtWec[/video]

[Video=youtube;kEe9EYbQICI]http://m.youtube.com/watch?v=kEe9EYbQICI[/video]

[Video=youtube;vw7_gfap7Po]http://m.youtube.com/watch?v=vw7_gfap7Po[/video]

[Video=youtube;hlB1VB2vQOc]http://m.youtube.com/watch?v=hlB1VB2vQOc[/video]
 

Turbo Habanero

New Member
Apr 28, 2009
4,229
0
0
35
Tucson,AZ
So I'm looking at aftermarket headgaskets since I will more then likely need a thicker head gasket.

I was looking at all the ones on eBay
Brands like the ones listed below come up but I don't know which to go with.

http://www.ebay.com/sch/i.html?_nkw...sket&geo_id=9232&adgroup_id=3364756740&crdt=0

Tomei
Apexi
Cosmetic
Brian crower


Are vvti and non vvti interchangeable ? Also is the 2jz-get hg compatible ?

I probably need something around 2.0mm and 86.5 bore

Drift motion sells this which I will more then likely go with as long as no one has negative things to say about Tomei.

http://store.driftmotion.com/static/i-tomei1372875201.php