Furious But Lazy 7M owner who gave Up.
- Thread starter Turbo Habanero
- Start date
Jordan, in this car game, you need to look out for yourself and letting this guy get over is doing yourself bad.
I believe I speak for everyone in this thread, who hasn't said it, man the F*** up and go get your money or at least for machining cost.
I believe I speak for everyone in this thread, who hasn't said it, man the F*** up and go get your money or at least for machining cost.
IBoughtASupra;1867652 said:
+1 Jordan your a nice guy but something like this you shouldn't just roll over, "turn the other cheek". He ripped you off, and he more than likely knew about it, unless he's a complete idiot!
Well, if "Emmy" was any kind of a person, selling someone an engine with SAND in it would upset me. I'd go ask if he's willing to try and make up for some of the added costs.
Have you torn the block down yet? How do all the journals look? With the sand all over it like that, make sure you hot tank that block as to clean all the oil passages really well.
Have you torn the block down yet? How do all the journals look? With the sand all over it like that, make sure you hot tank that block as to clean all the oil passages really well.
tell him cash is king. you don't know if that rifle is stolen, if it's genuine, etc. good luck trying to sell it, too.
Ok so here the deal I have currently $3,500 to finish my build
Things I need
Harness
Ecu
Igniter
Map sensor
Bell housing
Flywheel
Engine gasket set
Machine work for new headgasket and cleaning of the block.
Throttle cable
Valve job
Arp head studs
Arp flywheel bolts
Possible things
Rod bearings
Main bearings
Piston rings
Arp main studs
Arp rod bolts
Does this seem possible with only $3500
Things I need
Harness
Ecu
Igniter
Map sensor
Bell housing
Flywheel
Engine gasket set
Machine work for new headgasket and cleaning of the block.
Throttle cable
Valve job
Arp head studs
Arp flywheel bolts
Possible things
Rod bearings
Main bearings
Piston rings
Arp main studs
Arp rod bolts
Does this seem possible with only $3500
Last edited:
Definitely not.
It makes absolutely no sense whatsoever to go in there and reuse rings and bearings. If you come across deal you MIGHT get it done but the things you need to get in the second list, should be in your first list.
It makes absolutely no sense whatsoever to go in there and reuse rings and bearings. If you come across deal you MIGHT get it done but the things you need to get in the second list, should be in your first list.
So I just purchased
1JZ Engine Gasket Set
1JZ Bell Housing Bolt Se
1JZ Oil Sender Adapter Hose
1JZ R154 Bell Housing
1JZ 90deg PCV Valve
Aeromotive AFPR KIT
1JZ Standard piston Ring Set
ARP 1JZ Flywheel Bolts
Clevite Bearing Set for 1JZ (ROD and main bearings thrust washers incuded)
wrist pin bushing (x6)
Total after shipping was $1,341 this leaves me $2,150 cash in my account to finish.
still need.
machine work
flywheel
ecu + harness
throttle cable
igniter
map sensor.
1JZ Engine Gasket Set
1JZ Bell Housing Bolt Se
1JZ Oil Sender Adapter Hose
1JZ R154 Bell Housing
1JZ 90deg PCV Valve
Aeromotive AFPR KIT
1JZ Standard piston Ring Set
ARP 1JZ Flywheel Bolts
Clevite Bearing Set for 1JZ (ROD and main bearings thrust washers incuded)
wrist pin bushing (x6)
Total after shipping was $1,341 this leaves me $2,150 cash in my account to finish.
still need.
machine work
flywheel
ecu + harness
throttle cable
igniter
map sensor.
Last edited:
Its going to come down to how much you get charged for machine work. Are you getting (a):
Valve Job
Hot Tank
Oil pump
Lines For Your Turbo Setup
Downpipe
Intercooler Piping
Fan Clutch Setup
Timing Belt
Timing Belt Idler Pulley
Hydraulic Tensioner
Toyota FIPG
Please tell me you are getting a new oil pump....
Valve Job
Hot Tank
Oil pump
Lines For Your Turbo Setup
Downpipe
Intercooler Piping
Fan Clutch Setup
Timing Belt
Timing Belt Idler Pulley
Hydraulic Tensioner
Toyota FIPG
Please tell me you are getting a new oil pump....
Last edited:
IBoughtASupra;1868554 said:
Have intercooler but need pipes.
Have fipg
Have radiator and 16inch electric fan
Have timing belt
I was going to go and take the motor in and tell him that I just want it cleaned and decked and honed . But your right machine work is going to be deciding factor.
I need a vband downpipe
Soft oil lines for my turb
I will get a new oil pump
Was thinking of picking up light weight pully kit.
Ill look at the getting a new timing belt idler pulley and New tensioner.
Worst comes to worst ill be saving more money along the wya this is just what I have now
Do not think about a new timing belt components. Get them. That electric fan is not worth it. Save up for a fan clutch.
DO NOT BUY A LIGHTWEIGHT PULLEY KIT. That is all dress up, you have no use for that right now.
DO NOT BUY A LIGHTWEIGHT PULLEY KIT. That is all dress up, you have no use for that right now.
So after buying the ,
timing belt tensioner pulley
Hydraulic tensioner (serpentine belt tensioner)
Oil pump
That brings me to a total of $1680 spent and $1820 left
timing belt tensioner pulley
Hydraulic tensioner (serpentine belt tensioner)
Oil pump
That brings me to a total of $1680 spent and $1820 left
No, the timing belt tensioner is hydraulic. The serpentine belt tenionser is spring loaded.
Timing Belt
http://store.driftmotion.com/static/i-1jz2jzt-belthydrotens.php
Serpentine Belt
http://store.driftmotion.com/static/i-1jz2jzserpbelttens.php
Timing Belt
http://store.driftmotion.com/static/i-1jz2jzt-belthydrotens.php
Serpentine Belt
http://store.driftmotion.com/static/i-1jz2jzserpbelttens.php
I'll keep adding as I remember. RockAuto for OEM stuff will be very helpful to you. DM has a lot of stuff but RockAuto has good deals on the OEM stuff.