Hi, I'm on 15 psi with a 60-1 ct, lex afm, 550's, afpr at 40psi (no vac), and mkiv FP. When im doing 3rd 4th pulls my car feels like its jerking very lightly. I've experienced boost cut before and this is definitely not it. No codes.
-Steve
Hi, I'd like to know where i can buy wheel bearings for my 88-T. They've been shot for a while and i think they're getting worse. Does anyone have a site where they sell good ones? What about e-bay? can anyone send me a good link?
-Steve
Hi guys. so i think my shifter bushing fell into the tranny today. The bushing on the ball end of the shifter. I know this because the lever got stuck in a certain place in neutral and i wobbled it and it became real sloppy. How do i fish it out? Can i still drive it like this?
-Steve
Hi guys. I noticed my car running wierd and i think it is because i fouled out a plug. When i drive at 2/3rds throttle or more or try to accelerate the car picks up really slow. It doesn't have a misfire. The car kinda stumbles and shakes a little. This happens whether in boost or not. Mabye the...
Hi I opened my hood today and to my surprise was a rather girthy upper heater hose. I also have no coolant in the coolant resivor. Whenever i add coolant to the resivor it would just drip out of the drip tube. It would be bone dry once all the coolant has been dripped out. whats going on here...
Hi guys, When i rev my engine freely at around 3-4k rpm and up the engine almost sounds unbalanced. It has always done this. Kind of like the harmonic balancer isn't perfectly round or something. I'm pretty sure its not rod knock. What do you guys think?
Hey guys. Right now i have no heat shield and my aluminum IC piping gets pretty hot. Which would help more? Heat wrap on the pipes or a heat shield on the turbo?
-Steve
Hi guys. It seems like our wheels are both hub and jug centric. I'm running MK4 wheels. The front can benefit from wheel spacers. Is it reccommended to use washers as wheel spacers? What have you guys done?
-Steve
So i found out what was wrong with my car (hopefully). Now i gotta quiet it down. The DDP is a ZW motorsports piece with a flex section and a dump tube. at idle it leaks a bit and makes the car sound like a car out of boost but a beast on boost. The divider on the DP flange has a notched area...
Hey guys. I drove my supra for the 1st time tonight (see mods below). As some of you know, I had a bhg right after my rebuild. Well thats fixed but comes along another problem. My idle is really crappy. The car seems like it wants to die out and does at times. Can adjusting my AFPR fix this? I...
Hi, I have the 12v mod done to my car and im running an mk4 FP, 550's and a lex afm. I'm wondering if the 12v mod is too much. I see a lot of supra guy's engine bays still with the resistor pack and relay. To what extent of modifications should this mod be done?
-Steve
Hi guys i just completed my hg job with a cometic 2mm mhg. I also added some goodies like 550's, MKIV fuel pump, afpr, lex afm, 12v FP Relay mod and Hardpipes. Upon initial startup i found out my oil was white/milky. Could this be beacause of my assembly lube? Theres NO smoke out the exhaust...
Hi.I installed my Aeromotive FPR today and i jumped the FP and B+ pins on the diagnostic port and watched the needle jump up for 50+ psi. I pulled the jumper in fear of too much pressure before the needle stopped. I tried turning in the allen screw w/o the jumper the pressure dropped a tad then...
Hey guys. As i was doing my fuel filter this is what happened. How can I fix this? I was thinkin some nifty AN fittings and a pressure fitting or something along those lines. Honestly, I'm no good with line/pipe sizing so if you guys can help me out and send me links of what to get on summit...
hi guys. I was installing my MKIV fuel pump and i decided to change that 20 year old fuel filter as well. the banjo bolt came off easily however the fitting with the line atached gave me trouble. The threads were loose; however, the line and the fitting were rusted together. The line was...
Hi guys, I've owned my supra for a little more than a year and have yet to fix the stupid power lock issue. OK, Everything works to unlock the doors. The switches are able to unlock the doors from the inside and i can do it by the key also. The problem is locking the doors. I can't use the...
Hey guys. You know how car colors have names like royal sapphire pearl, quicksilver, sedona red, brilliant red, world rally blue... so on and so fourth. What is the name of the bright red for mk3's? Just wondering.
-Steve
I'm looking for a set of exhaust bolts for my 7M-GTE and I've tried Autozone, R&S Strauss, and a couple of local service stations. None of those places had the studs. Can someone tell me the size of the stud and bolt and where online can i order them? Thanks!
-Steve
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.