I ran a safc on my single turbo hx35. With 550cc injector boosting14 psi All day... U won't be able to run 440s on the 1jz without a fuel controller. It will be way too rich.. And there's a lot of guys making good power running a safc. Buy a map ecu 2 . I just sold mine for 250...
I ran a eBay manifold on all my 1jz's and never had a problem.. Both cars were freeway monsters. My Last one. Some kid from Seattle bought it and he swap my emanage blue for a aem ecu dynoed at 480whp. eBay manifold and eBay waste gate . Now I'm running a eBay manifold with a bw s366...
I thought the problem was that the car was running rich/lean. now youre saying its breaking up? you should try regapping the plugs and check your coils for cracks.
whats your mod list? and what numbers were you able to pull on the dyno? (curious)
when i was getting mine tuned (apexi safc) i had a lean/rich spot i couldn't get rid of it around 5500 though.. and i was running a water/meth kit. and 550cc which was plenty for the 15psi. it was either rich...
from what you said, it sounds like a fuel pump. or power to it.. so use a multimeter or a check light to see if you have power going to the pump wires if so replace the pump and try again.. or did what you did again (hot wire the pump straight to the battery and spray starting fulid in the...
these china manifolds are a hit and miss.. some have ran them for over 2 years and mine for example lasted me 4-6 months or something b4 it cracked and all.. i had a cxracing manifold which makes the turbo sit straight. foward. meaning not clocked at all. and it was kind of a pain in the arse...
its a china manifold also, but its cleaned up a little... from what i've seen its sits pretty good i know someone running their kit with a different turbo and so far so good..
so im picking up this air research turbo intake a/r 60 and 1.0 exhaust.
mods are full 3 inch exhaust
stock motor
fmic
2jz cams
440cc inj.
walbro 255
greddy emanage blue
any chance ill see full boost (18psi) by 4500?
best advice is to retrace everything... make sure you haven't forgotten anything because assuming you still have the twins it will be fucking heavy. you will need help lifting that. fuel, oil lines everything is disconnected?
no T4 but my buddy said i can buy a housing for about 80-100 bucks.. i will call precision tomorrow and see wasup.. heres a link to his add on the clublexus forum in case anyone wants to buy it...
yeah if you google that nb085 a link to a post on the maxima forums says the same thing... i was going to replace it with a hx35 but looks like its a t4 flange on my manifold so ill stick with it. well my car is not smoking or anything so it still good for now. i'm shopping around for a...
picked up this setup a few months ago and i have a few questions on it.
things i need to figure out.
1- so my problem is that i have a little bit of oil inside the turbo intercooler pipping.
2- its a little humid/dirty of oil on the cold side of the compressor outside of the turbo. (im...
I've been running rotella T which is 5-w40 for the past 6 years.. walmart for the win lol anyways on my 04 f250 diesel with 07 front end.. beautiful truck by the way Zrain25 mine was a Lariat 6.0 shitty motor but lasted me a while crew cab 4x4. anyways my 04 yamaha r1 . one of them i sold...
only if i knew.. i got the wastegated hx35 and its slow lol. but when its on its like donkey kong. will the hy35 housing work or does it have to be a bulleye ? my turbo is brand spanking new.. well i bought it new and it go about 2k miles on it..
looks like an ebay manifold SS autochrome. from what i've been told they clean up the rough edges and blemishes on the inside... i ended up going with a XS Power manifold. one thing i noticed is that my flange is not angled like everyone elses are.. so my turbo sits straight foward. my HX35...
a buddy of mine swapped a 1jzgte vvti into his 240sx and man let me tell you.. pain in the ass. all sorts of problems trying to get it to run right because of the throttle conversion since its fly by wire and usually the swap doesnt come with the sensors and pedal connections to keep the fly by...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.