Information on this Single turbo ..

[scmaluco]

picked up this setup a few months ago and i have a few questions on it.

things i need to figure out.

1- so my problem is that i have a little bit of oil inside the turbo intercooler pipping.

2- its a little humid/dirty of oil on the cold side of the compressor outside of the turbo. (im assuming my seals are leaking or leaked.)



other than that the car runs great. i just dont like how laggy the turbo is. i'm boosting 15psi (bpu mods + greddy emanage) and i don't see full boost until 5500-6k rpm revs until 8k . i'm trying to find out what brand it is. and if its worth getting it rebuilt. and if so maybe i can upgrade something.. if all worth the money of course.

thanks.

heres a few pics.

 

[BryanDyer]

only thing I can find anywhere with nb085 .68 is an eBay 16g turbo
can't find anything with "Sno" on it

 

[scmaluco]

only thing I can find anywhere with nb085 .68 is an eBay 16g turbo
can't find anything with "Sno" on it

yeah if you google that nb085 a link to a post on the maxima forums says the same thing... i was going to replace it with a hx35 but looks like its a t4 flange on my manifold so ill stick with it. well my car is not smoking or anything so it still good for now. i'm shopping around for a turbo still. a friend of mine has a precision 5858 turbo dual ball bearing . its a 1600 turbo for 900 (less than 50 miles on it) but i will need a new exhaust housing since his is a .82 and its v band. i just dont want to spend that kind of money right now..

 

[BryanDyer]

is the one you have right now a v band?

 

[scmaluco]

is the one you have right now a v band?

no T4 but my buddy said i can buy a housing for about 80-100 bucks.. i will call precision tomorrow and see wasup.. heres a link to his add on the clublexus forum in case anyone wants to buy it..

http://www.clublexus.com/forums/sc4...858-ball-bearing-sc3-4-to-2jzgte-harness.html

 

[f00g00]

The sno is on the pipe that is welded on so it could be from something else.