Hey gang,
I have a question on the injector seals. I have a decent vacuum leak where the rail injectors meet the manifold. My 2 o rings around the injectors are seal well. I checked for the leaks. I understand there is a third o ring at the base of the injector and a grommet where the rail...
Hey guys,
Im In the situation of not getting any charge by the alt. Just put in a new alt but have the exact same situation of 10.4 - 11.0 volts while slowly dying.
I have read about a wire that goes to the fuse box. I have my battery cable going directly from the alt to the battery...
Hey guys,
Just got the 1jz supra up and running with the stinger or least operational. Looking for someone with a running stinger to run some ideas and questions off of. I don't want to tie up the forums with beginners questions. Either someone to PM or phone.
Also, if anyone has a tuned...
Hey I am about to install my machined 2J cams in my 1J. Ran across a couple areas.
1) I thought I remembered which cam is which...unfortunately that fell apart LOL...what is the best way to tell the intake from the exhaust cam?
2) In the TSRM (2J) during install it speaks of installing...
Well guys, my supra died an unfortunate death yesterday night. I was headed down to OC MD for the hot rod weekend and the car was driving better than it ever has. Double checked everything before I hit the road but did not make it to the destination. I was driving down US 1 South and noticed a...
New car club site:
http://tuners.meetup.com/1
Hopefully that link works. If it doesnt let me know. Under development but trying to bring upper east coast car guys into one place!
NORTHEAST NHRA SPORT COMPACT NATIONALS
Atco Raceway, Atco, N.J.
It looks like sunday is the day to go. Has a car show and some other events that day.
http://www.atcorace.com/artman/publish/cat_index_5.php
Imma try to hit this up...weather depending of course
I am in the process of a swap from NA to GTE. I have a Pre 89 GTE and a 1989 car. I was looking into getting a turbo parts car. If I buy a 87 or 88 turbo car, can I just swap the parts or is it set in stone that a post 89 car has to have the electronics and harness from a post 89 car. The 87 and...
I ordered a cometic metal head gasket from importperformanceparts.com and in the mail I recieved a wiseco metal head gasket. Before I call them and start badgering them is this as good as a cometic? Anybody used this maker before?
I am about to seal up my oil pan and I was looking in the toyota factory manual. There are these diagrams with A, B And C with pictures that I cannot figure out what they are hinting at. Does anyone know the meaning of these diagrams? Also, How thick of a bead did you run of FIPG on your oil pan.
I was reading that everybody is using the FIPG instead of the fel pro cork gasket. I could't find a final verdict on this. Does the fel pro seal properly? Also, would fel pro engine gaskets be mistake in comparision from the ones that could be bought from toyota?
I have always wondered what is the best prep for a gasket.(water pump, oil pan etc) I have always used some RTV and the gasket. A guy was once telling me that when doing his water pump he did not even bother using a gasket sealer and got no leaks. What do you guys think? sealent needed? A lot or...
I was going back and forth between whether I should buy a new oil pump for my jdm 7mgte. The inside of the engine was immaculate and the oil pump seems to be fine. Do you guys usually swap these out before you swap in the motor? I know what I "should" do but what's you guys opinion on it...
Now you guys got me all siked up. I was gonna just go with an upgraded ct-26 but now i am liking the sp61gt from sound performance. I went to their website and saw more than that turbo tho. I saw a sp58gt and sp59gt. Do all these bolt up to the stock 7mgte exhaust manifold? The sp61gt does bolt...
Guys, I hate to do this to ya but I am in the process of building up and swapping in 7mgte into my NA body. Shooting for 450 horses at the crank when all is said and done. As I have questions I will be submitting them to you guys because I figure someone has crossed these bridges before and why...
I am in the process of swapping 7mgte in my NA body. I curretly like my NA setup for the power steering. Do i have to use the one from the turbo motor or can I use the one from the NA motor?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.