Search results

MAFT Pro has a boost controller built in... ;)

I'm working on a GTE setup and I needed to clean up and patch a bunch of the wiring. So, while I was at it I put together what I hope is a clean and easy to follow wiring diagram. Anyone care to let me know if I forgot any connections? This is for an '88. I'll put together one for 89+ later...

I honestly don't know of a good online tutorial for complete novices. I'd be interested in seeing one though. For "tuning" there is another item which hasn't been discussed at length just yet. A Wideband Oxygen sensor (WB O2) and controller is a must for automotive tuning. The stock...

I'll try to keep this simple: (and yes as such I'll be omitting a fair amount of info and possibly leaving assumed relations/comparisons which aren't 100% accurate) A MAF is a Mass Air Flow sensor. It's used in measuring the MASS of the air entering the engine. The differences between one of...

Aside from less tinkering I'd take the MAFT Pro over the GTE electrical swap any day. Timing control (remember that the GTE ECU's timing map is still not intended for the higher compression GE, get something you can adjust it with), boost control, fuel tuning and you can go with either an...

That'd work, I just meant to cut the bolts off though.

Someone just went through this. IIRC, he said that when he cut the frame open he found that the nut itself wasn't welded down, but there's a metal cap that holds it in place which is supposed to be welded down. If you're going to be cutting the frame, I'd go and just weld it back in place from...

Welcome to the group! How about some more details? Now let's see some pics... ;)

http://www.supracentral.com/index.php?option=com_content&task=view&id=35&Itemid=42

Come to Colorado and I'll help. :D Seriously though, how's the intake piping run? You may want to see if it'll run in blow through mode (with the AFM placed between the throttle body, not in front of the turbo)... I recall a few people had to do that with their 1/2 N/A-T projects. I really...

Okay, this little component can be a major bugger to deal with in a number of circumstances. I may do a writeup on rebuiling them, but for now lets start with covering the stock values and modifying it to work with lighting that's different than stock. There are two resistors which set the...

7cm.... need pics? Now that I went a dug one out.... EDIT: pics on their way. Look at the rear shots to see the part that sits recessed, what you see from the front all sits on top of the cluster bezel.

In my '88 I think that one was tucked up above the ECU's wiring.

Okay, now you're confusing me... I thought you had a SM in your hands? Are you asking for the width of the display housing (which is the same as the basic USDM clock) or the maximum width of the display or the width of the button panel? I've got a few SM's here somewhere, but it's been a long...

Hey, I didn't get home until a little bit ago and then I had to leave again... had a horrible day. I got a couple pics of what I *think* is the right plug, but I was quite busy. I'll email the to you now.

We need a section devoted explicitly to wiring diagrams. I'm working on a few at the moment myself. Props for giving back to the community like this!

N/A's had 4.30 differentials, whether open or LSD. At least in the US. Willfish, so the two bolts which secure the diff to the subframe are spinning? Sounds like the nuts inside the subframe broke loose from their welds. It's happened before. The last time I recall it being mentioned on here...

Which connector is that and for what year do you need it? I happen to be in the middle of restoring a very unhappy wire harness... and I actually took a couple pics (for some reason). PM me your email addy again. If what you need isn't in what I send you let me know and I'll try to get a good...

Yup, same goes for just driving better on the second run. :biglaugh: Yup, everytime I try it I keep running out of power cord... do you have any idea how expensive 1/4 or a mile of extension cords costs? :nono:

'88 TEWD, TSRM and Collision/Body Repair Manaul.