Search results

This is what I was talking about.... block to sender http://store.driftmotion.com/Static/Item1jzssoilpressuresenderadapterfor18nptsender.php

The pinion angle is non adjustable.... the new axle is installed the same as the old one though. I believe all my bushings in the 4 link setup are causing my problem, they are rubber and they are factory origionals. Which I guess changes the pinion angle when its under heave throttle, but I...

DRIFTMOTION sells a braided stainless adapter that is pre made. It is listed under their 1jz section, but it works perfectly on the 7m. I used it on my 77 celica 7m swap, using a autometer pressure sender.... Veryyyyy satisfied with the adapter!

I have reallllly been neglecting my Project page here, I have been having too much fun driving the car! Much faster than expected, I believe it should run about mid 12's or so in the 1/4. I still have a wheel hop problem pretty bad, but I am working on a solution. I have not had too much...

tire blew off the bead on the last run though....FTL Thanks again to everyone that helped me out with a jack and stuff. I just ended up going home and stealing my moms camry spare haha. The tire has some sidewall bubbles and stuff and the valve stem got cut somehow. Anyways, I am...

I have some wheel hop problems that need to be solved :(

after months my thread finally gets moved??? weird. too bad barely anyone looks in this section.

Went out for another cruise last night and visited my friend rob and his buddy. Here are the hood closed pics some people have been waiting for! IMO it looks EXCATLY the same as it did before the swap :) Big Rob standing next to Grampa(olds 4.4.2. with N2O), and Me (Chris)...

Honestly I have no idea what that is.... fill me in? Sounds like it would be in chicago though, if I could find someone to ride with me I would head out there, just need to know when it is.

I will be there saturday, but I dont know if I will be bringing the car, I have not had enough driving time in traffic yet to know if it will overheat or not. But I will definently be out at woodward during the week that week though when there is still a lot of cars driving around but it isn't...

I could get away with it for a lil bit.... but I dont want to melt the carpet.... or well, ya know..............................suffocate :cry:

Bump... for another vid I added to the top of this page

I didnt want to take it any farther from my house than I did becasue I did not any police trouble, its too damn loud with an open DP. The run was not from a stop... I dont want to break anyhting yet.... I just eased into it slowly from a 10-15 roll. then hit second and third. I got some...

Took the car for a test drive last night! Its faster and more scary than expected, thats good right? Its a little loud becasue there s no muffler yet, that comes saturday. http://www.youtube.com/watch?v=07hd1T2-k9A easy longer drive.... too loud...

I just bent it a littttttle bit :naughty: I really hope it doesnt effect too much... but thank you, I will keep an eye on it and take some side to side measurements after that first drive.

Hopefully I will go for the first test drive..... tonight... I hope I am having a problem though... it ran perfect 2 days ago, and then the last time I started it it was shaking and running on 5 cyl.... have to fix that before the drive All that is lleft before the drive is to put in the...

Here are some more updates for you! Hole in the bumper finished, I plan on putting some sort of mesh or grille in there still rear end in for the final time Diff pig mounted, 3.91 ratio and limited slip. only thing I am missing now is that damn pinion seal...

Thanks for all the comments and suggestions guys!

I am hoping for just a few more weeks!

Rear end updates! Over the weekend my father and I cut and transferred all of the rear end brackets, mocked it up in the car, painted it, and also burped the cooling system. My dad tacking a few brackets Half transferred panhard bar mount, shock mount, up and lower link mounts...