Search results

^they also have been known to come with bhg's and rod knock. you can find gte blocks easy. just ask a jz guy they prolly got one sitting around. post on the want to buy area and look in the for sale section. if your on stock hg your motor is not going to last very long.

^yeah awesome video.

try going one tooth forward on the cam when putting it in.

you have any codes? http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=23

he seems very helpful to me.(especially if you don't half as things)

pull the no 1. plug wire and see if it goes away.

http://www.arizonaperformance.com/7M_OPS_page.html hard line. no hose like the ss line.

pull the door panel off. find the connector for the motor. add power to one side. add ground to the other. if it goes down switch sides with power and ground and it will go up. if nothing happens or it clicks like you already said your motors toast.

its not necessary and you don't have to pull everything out the replace that just remove the oil pan. if you search threw the vendors there's also a bigger hard pipe hat some makes that in my opinion would be a better choice.

you should throw that thing in the trash and get proper supporting mods.

sand it down, patch weld it, and grind smooth.

FYI part numbers are always 10 digits. http://www.trademotion.com/partlocator/index.cfm?action=searchCatalogOEM&siteid=213747

next time before you bolt on the PP spin the disc on the fly wheel to make sure nothing hits.

its possible you'll have to make some new hard lines or they just deleted it all together. edit: got beat

check to see if you have resistance in the switch. http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?Section=BE&P=31

2 clues. code 24 and 31. both are for the afm. a loose connection will give this intermittent problem.

not all cars have abs.

water boils at 212*F. with every psi the cooling system is under pressure that bumps the boiling point of water up.

its 2 gaskets and there under 4$ each from Toyota. go to Toyota and not some shit aftermarket gasket company. stock gaskets work great. Toyota's fipg also works great. http://www.cygnusx1.net/Supra/Library/EPC/291220/catalog.aspx?F=1106&P=1

check your afm. tubros have a air flow meter n/a's have a mass air flow sensor. the afm is what controls the fuel pump once its started so that would be your trouble area since your not getting fuel.